Abstract:Bacterial adhesion to stainless steel surfaces is one of the major reason causing the cross-contamination and infection in many practical applications. An approach to solve this problem is to enhance the antibacterial properties on the surface of stainless steel. In this paper, novel antibacterial stainless steel surfaces with different copper content have been prepared by a plasma surface alloying technique at various gas pressures. The microstructure of the alloyed surfaces was investigated using glow discharge optical emission spectroscopy (GDOES) and scanning electron microscopy (SEM). The viability of bacteria attached to the antibacterial surfaces was tested using the spread plate method. The antibacterial mechanism of the alloyed surfaces was studied by X-ray photoelectron spectroscopy (XPS). The results indicate that gas pressure has a great influence on the surface elements concentration and the depth of the alloyed layer. The maximum copper concentration in the alloyed surface obtained at the gas pressure of 60 Pa is about 7.1 wt.%. This alloyed surface exhibited very strong antibacterial ability, and an effective reduction of 98% of Escherichia coli (E. coli) within 1 h was achieved by contact with the alloyed surface. The maximum thickness of the copper alloyed layer obtained at 45 Pa is about 6.5 μm. Although the rate of reduction for E. coli of this alloyed surface was slower than that of the alloyed surface with the copper content about 7.1 wt.% over the first 3 h, few were able to survive more than 12 h and the reduction reached over 99.9%. The XPS analysis results indicated that the copper ions were released when the copper alloyed stainless steel in contact with bacterial solution, which is an important factor for killing bacteria. Based on an overall consideration of bacterial killing rate and durability, the alloyed surface with the copper content of 2.5 wt.% and the thickness of about 6.5 μm obtained at the gas pressure of 45 Pa is expected to be useful as antimicrobial materials that may have a promising future in antimicrobial applications. © 2011 Elsevier B.V. All rights reserved.

The Role of the Bactericidal Mechanism of Copper Elements and Its Effect on the Corrosion Resistance of Steel

Antibacterial Mechanisms: Toward a Molecular Understanding of the Antibacterial Mechanism of Copper-Bearing Titanium Alloys Againststaphylococcus Aureus(adv. Healthcare Mater. 5/2016)

Corrosion resistance and corrosion behavior of high‐copper‐bearing steel in marine environments

Antibacterial mechanism of Cu-bearing 430 ferritic stainless steel

Effects of Cu Content on the Corrosion Resistance and Antibacterial Property of Low Carbon Steels

An Investigation of the Antibacterial Ability and Cytotoxicity of A Novel Cu-Bearing 317l Stainless Steel

Effect of copper addition on mechanical properties, corrosion resistance and antibacterial property of 316L stainless steel

Inhibition of Staphylococcus Aureus Biofilm by a Copper-Bearing 317L-Cu Stainless Steel and Its Corrosion Resistance.

The impact of alloying element Cu on corrosion and biofilms of 316L stainless steel exposed to seawater

Corrosion Behavior of Copper Bearing Steels and the Derived In-Situ Coating

Effect of Cu addition to AISI 8630 steel on the resistance to microbial corrosion

The Electrochemical Corrosion Behavior and Antibacterial Properties of Cu-xFe Alloy

Copper As an Antibacterial Agent for Human Pathogenic Multidrug Resistant Burkholderia Cepacia Complex Bacteria

Surface microstructures and antimicrobial properties of copper plasma alloyed stainless steel

Influence of copper distribution in thermally sprayed Cu-bearing coatings on corrosion and microbial activity

Enhancement resistance to microbiologically influenced stress corrosion of Cu-bearing steel against Bacillus cereus

Dual Antibacterial Properties of Copper‐Coated Nanotextured Stainless Steel

Microbial Communities Present on Mooring Chain Steels with Different Copper Contents and Corrosion Rates

Antibacterial Property, Corrosion and Discoloration Resistance of Pure Copper Containing Zn or Ni

Copper as an antimicrobial agent against opportunistic pathogenic and multidrug resistant Enterobacter bacteria

Enhanced antibacterial and corrosion resistance of copper-containing 2205 duplex stainless steel against the corrosive bacterium Shewanella algae