Abstract:Transporting light signals over the corners and sharp bends imposes high optical loss and distortion on the mode profiles. Usually, bends with larger radii are used in circuits to minimize the loss over transmission, resulting in a severe limitation in integration density. In this paper, we propose novel topology-optimized optimized L-bend and U-bend structures designed for a 220 nm silicon-on-insulator (SOI) platform. Optimized L-bends with footprints of 2.5 μm × 2.5 μm, 1.5 μm × 1.5 μm, and 1 μm × 1 μm show maximum insertion losses of only 0.07 dB, 0.26 dB, and 0.78 dB, respectively. For optimized U-bends with footprints of 3 μm × 3.6 μm, 2.5 μm × 2.5 μm, and 1.5 μm × 1.5 μm, the maximum insertion losses are 0.07 dB, 0.21 dB, and 3.16 dB. These optimized bends reduce the maximum insertion loss by over 50% compared to un-optimized arc-type bends across a broad wavelength range of 1450–1650 nm. Experimental verification of a meander line with 16 optimized U-bends (3 μm × 3.6 μm) demonstrates an averaged insertion loss of 1.23 dB in the wavelength range of 1520–1580 nm, agreeing with simulated results and indicating a high potential of loss reduction with optimized bends.

What problem does this paper attempt to address?

The main problems that this paper attempts to solve are as follows: On silicon photonic integrated circuits, traditional optical waveguide bending structures will cause significant optical transmission losses and mode distortion at small - radius bends. These problems limit the possibility of high - density integration and affect the effective transmission of optical signals. Specifically, the paper focuses on the following problems: 1. **High optical loss**: When the optical waveguide bends at corners or acute angles, higher insertion loss will be caused due to non - zero curvature, mode mismatch, scattering, absorption and other factors. 2. **Mode distortion**: The mode distribution in the bending area will change, resulting in mode mismatch between the input and output waveguides, thereby reducing the transmission efficiency. 3. **Compactness and integration**: In order to reduce losses, bends with a larger radius are usually used, but this will take up more space and limit the compactness and integration of the circuit. To solve the above problems, the author proposes a new type of L - shaped and U - shaped ultra - compact optical waveguide bending structures based on topological optimization design. These structures aim to minimize propagation losses (including mode mismatch, radiation losses and sidewall roughness) and achieve efficient transmission in a wide wavelength range. ### Main improvement points - **Ultra - compact size**: Through optimized design, a bending structure with an extremely small size (such as 1 µm × 1 µm) is achieved, thereby improving the integration. - **Low insertion loss**: The optimized L - shaped and U - shaped bending structures show low insertion losses at different sizes. For example, the maximum insertion losses are 0.07 dB, 0.26 dB and 0.78 dB (L - shaped) and 0.07 dB, 0.21 dB and 3.16 dB (U - shaped) respectively. - **Broad - band performance**: The optimized bending structures perform well in the wide wavelength range of 1450–1650 nm. Verification experiments show that the average insertion loss of a serpentine line composed of 16 optimized U - shaped bends is only 1.23 dB in the wavelength range of 1520–1580 nm. ### Summary By introducing the topological optimization method, the paper successfully designs an optical waveguide bending structure with low loss and high compactness, which significantly improves the performance and integration of silicon photonic integrated circuits. This achievement is of great significance for future high - performance optical communication, sensing and other photonics applications.

Ultra-compact and efficient photonic waveguide bends with different configurations designed by topology optimization

Waveguide Bends from Nanometric Silica Wires

Ultra Sharp Curved Waveguide Design Based on Topology Optimization

Low-loss and Low-Crosstalk Multimode Waveguide Bend on Silicon.

Ultra-thin silicon-on-insulator waveguide bend based on truncated Eaton lens implemented by varying the guiding layer thickness

Silicon-on-Insulator Waveguide Devices for Broadband Mid-Infrared Photonics

Ultralow-loss Waveguide Crossing for Photonic Integrated Circuits by Using Inverted Tapers

Compact Waveguide Bend with Digital Meta-Structures on the Silicon-on-insulator Platform

Multimode Optical Waveguide Enabling Microbends with Low Inter-Mode Crosstalk for Mode-Multiplexed Optical Interconnects.

Optimizing Design to Optical Waveguide Bend Structure

Inverse Design of Ultra‐Compact Multimode Waveguide Bends Based on the Free‐Form Curves

Ultra-sharp Multimode Waveguide Bends Based on Superellipse Curves and Shallowly Etched Nanoslots Designed by an Intelligent Algorithm

Multimode Waveguide Bends in Lithium Niobate on Insulator

Ultra-Compact Inverse Designed Multimode Waveguide Bend Based on Levelset Method

InP optical amplifiers with Euler U-bend waveguide geometry for low-loss flip-chip hybrid integration

Ultra‐Sharp Multimode Waveguide Bends with Subwavelength Gratings

Ultra-compact high efficiency and low crosstalk optical interconnection structures based on inverse designed nanophotonic elements

Ultra-Compact Multimode Waveguide Bend with Optimized Dual Bezier Contours

Ultra-compact, low-loss,TE_0- and TE_1-compatible mode waveguide bends

New silicon photonics integration platform enabled by novel micron-scale bends

Meta-surface-enabled ultra-sharp multimode waveguide bends on silicon