Abstract:Hybrid capacitive deionization (HCDI) is an emerging and promising technology for water desalination and has been extensively explored in recent years. Designing a structure-tailorable electrode material has been proved to be a valid strategy for achieving a higher salt adsorption capacity (SAC). In this study, MnO2 materials with tailorable phase compositions and crystallinities were prepared hydrothermally and then evaluated as electrodes for removal of ions from a NaCl solution in a membrane-free HCDI cell. MnO2 electrode materials tested in the HCDI system include poorly crystalline δ-MnO2 along with abundant amorphous phases (MnO2-1h); crystalline δ-MnO2 with plentiful amorphous MnO2 (MnO2-2h); MnO2 mixtures of α-, δ-, and amorphous MnO2 (MnO2-5h); and α-MnO2 nanowires with minor amorphous MnO2 (MnO2-12h). Our results revealed that the phase composition and the crystallinity of MnO2 materials govern their specific capacitances and thus the SAC values. When the cell voltage is 1.2 V, the lamellar-structured poorly crystalline MnO2-1h electrode with the lowest crystallinity demonstrates the highest SACs of 13.84 mg g–1 in 100 mg L–1 NaCl (1.71 mM) and 21.32 mg g–1 in 500 mg L–1 NaCl (8.56 mM) solutions, respectively. The desalination efficiencies of the MnO2−1h electrode are remarkable and much greater than other MnO2-based electrodes under similar conditions (e.g., NaCl concentrations, cell voltage, etc.). This study sheds light on the significance of understanding the fundamentals of both the phase composition and crystallinity in defining the desalination performance of MnO2 electrodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c04101?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c04101</a>.Phase weight percentages of MnO2; pore, microstructure, and electrochemical characterization data of MnO2; Na+ fractions in cycled electrodes; schematic of the CDI device; N2 absorption–desorption isotherms and pore size distribution of MnO2; curves of CV, GCD, and IR drops of electrodes; comparison of the maximum SACs of electrodes with previous references; curves of recycling performance and the corresponding current response of the MnO2-1h electrode; and XRD patterns of the MnO2-1h electrode before and after desalination (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c04101/suppl_file/sc0c04101_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Mechanistic insight into the electrochemical absorption adsorption behaviour of Cd2+ and Na+ on MnO2 in a deionization supercapacitor

The exploration and comparison of adsorption mechanisms in MnO 2 with different crystal structures for capacitive deionization

MnO2 decorated N-doped mesoporous carbon electrodes boost enhanced removal of Cu2+ and Pb2+ ions from wastewater via a hybrid capacitive deionization platform

Manganese doping strategy for enhanced capacitive deionization performance of MoS 2

Pseudocapacitive desalination via valence engineering with spindle-like manganese oxide/carbon composites

Electrodeposited Manganese Dioxide/Activated Carbon Composite As a High-Performance Electrode Material for Capacitive Deionization

A novel ε-MnO 2 /MXene composite as an electrode with excellent conductivity and ultrahigh capacitive deionization

Synthesis of Low-Crystalline MnO2/MXene Composites for Capacitive Deionization with Efficient Desalination Capacity

N-doped MnO 2 with abundant oxygen vacancies achieves high-capacity and stable ammonium ion capture by capacitive deionization

Mn 3+ e g Configuration and Electron Transfer in Na-Incorporating α-MnO 2 to Improve Electrochemical Supercapacitor: An In Situ and Ex Situ X-ray Absorption Spectroscopic Investigation

Comprehensive Study on the Ion-Selective Behavior of MnO x for Electrochemical Deionization

Pseudocapacitive Deionization of Saltwater by Mn3O4@C/Activated Carbon

Boosted brackish water desalination and water softening by facilely designed MnO2/hierarchical porous carbon as capacitive deionization electrode

Enhanced capacitive desalination of MnO2 by forming composite with multi-walled carbon nanotubes

Preparation of a manganese dioxide/carbon fiber electrode for electrosorptive removal of copper ions from water

Delocalizing the d-electrons spin states of Mn site in MnO2 for anion-intercalation energy storage

Phase- and Crystallinity-Tailorable MnO 2 as an Electrode for Highly Efficient Hybrid Capacitive Deionization (HCDI)

Capacitive Behavior and Charge Storage Mechanism of Manganese Dioxide in Aqueous Solution Containing Bivalent Cations

Efficient hybrid capacitive deionization with MnO2/g-C3N4 heterostructure: Enhancing Mn dz2 electron occupancy by interfacial electron bridge for fast charge transfer

Improve the Intrinsic Conductivity of MnO2 by Indium Doping for High Performance Neutral Aqueous Sodium-Ion Supercapacitors with Commercial-Level Mass-Loading

Ion selective electrosorption by two pseudocapacitive intercalating nanocomposite electrodes