Abstract:This paper presents a clamping force sensor based on fiber Bragg grating (FBG) to provide interaction force feedback for laparoscopic surgery. The proposed sensor mainly consists of a force-sensitive clamping flexure and a tightly suspended optical fiber with an FBG inscribed. The force-sensitive clamping flexure utilizes a bridge-type structure with an excellent load-bearing capacity and anti-interference ability to linearly convert the vertical force or displacement input exerted on the grasping surface into translational deformation along the flexure central line. The FBG fiber is arranged along the flexure central axis to sense the vertical force-induced horizontal strain. This two-point pasting configuration can achieve a uniform fiber strain distribution and an enhanced sensitivity. This assembly arrangement produces a linear relationship between the applied vertical force and the force-induced horizontal strain value sensed by the FBG. The force sensitivity remains the constant and it less affected by the grasping positions due to the high stiffness and deformation conversion, overcoming the difficulty that the traditional clamping force sensor designs are sensitive to the grasping position due to the variable grasping positions and areas on the soft tissues during clamping. The finite element method (FEM)-based simulation has been utilized for design optimization and performance investigation to guide the sensor design. The simulation sensitivity values have been determined as a close value of 52pm/N regarding the three different grasping positions at middle, left and right parts. The optimized sensor design has been integrated into a manual surgical grasper and achieve experimental sensitivity values of 56.2pm/N, 51.1pm/N and 47.5pm/N for the three different loading positions within [0, 10N]. Both dynamic loading experiments and clamping experiments on ex-vivo tissues and in-vivo animal for tissue resection were implemented to validate the effectiveness of the proposed design.

Puncture force sensor based on optic-fiber Fabry-Perot interferometer

Optical Micro/Nanofiber-Enabled Compact Tactile Sensor for Hardness Discrimination.

Identification of tissue types and boundaries with a fiber optic force sensor

Three-Dimensional Force Sensor Based on Fiber Bragg Grating for Medical Puncture Robot

Sensitivity-enhanced Optical Sensor Based on Multilayer Coated Fabry–Pérot Interferometer

A Micro‐3‐Degree‐of‐Freedom Force Sensor for Intraocular Dexterous Surgical Robots

Development of a Distal Tri-Axial Force Sensor for Minimally Invasive Surgical Palpation

Tactile needle probe for minimally invasive tissue identification during epidural space insertion

High Sensitivity Photon Pressure Sensitive Skin of Piercing Robot Based on Balloon-Shaped Fiber Optic Sensor

High-Sensitivity Microfiber Strain and Force Sensors

Development of a Fiber Bragg Grating-Enabled Clamping Force Sensor Integrated on a Grasper for Laparoscopic Surgery

A sub-millimetric, 0.25 mN resolution fully integrated fiber-optic force-sensing tool for retinal microsurgery

FBG-based three-dimensional micro-force sensor with axial force sensitivity-enhancing and temperature compensation for micro-forceps

FBG-Based Sensorized Surgical Instrument for Force Measurement in Minimally Invasive Robotic Surgery

The Tactile Force Sensing of the Gripper Based on the Mode Interference Fiber Sensor

A robotic puncture system with optical and mechanical feedback under respiratory motion

Miniaturized Piezo Force Sensor for a Medical Catheter and Implantable Device

A Miniature Triaxial Fiber Optic Force Sensor for Flexible Ureteroscopy

Research on the Fabrication and Parameters of a Flexible Fiber Optic Pressure Sensor with High Sensitivity

A submillimetric 3-DOF force sensing instrument with integrated fiber Bragg grating for retinal microsurgery

An optical fiber Fabry–Pérot micro-pressure sensor based on beam-membrane structure