Abstract:This paper presents a clamping force sensor based on fiber Bragg grating (FBG) to provide interaction force feedback for laparoscopic surgery. The proposed sensor mainly consists of a force-sensitive clamping flexure and a tightly suspended optical fiber with an FBG inscribed. The force-sensitive clamping flexure utilizes a bridge-type structure with an excellent load-bearing capacity and anti-interference ability to linearly convert the vertical force or displacement input exerted on the grasping surface into translational deformation along the flexure central line. The FBG fiber is arranged along the flexure central axis to sense the vertical force-induced horizontal strain. This two-point pasting configuration can achieve a uniform fiber strain distribution and an enhanced sensitivity. This assembly arrangement produces a linear relationship between the applied vertical force and the force-induced horizontal strain value sensed by the FBG. The force sensitivity remains the constant and it less affected by the grasping positions due to the high stiffness and deformation conversion, overcoming the difficulty that the traditional clamping force sensor designs are sensitive to the grasping position due to the variable grasping positions and areas on the soft tissues during clamping. The finite element method (FEM)-based simulation has been utilized for design optimization and performance investigation to guide the sensor design. The simulation sensitivity values have been determined as a close value of 52pm/N regarding the three different grasping positions at middle, left and right parts. The optimized sensor design has been integrated into a manual surgical grasper and achieve experimental sensitivity values of 56.2pm/N, 51.1pm/N and 47.5pm/N for the three different loading positions within [0, 10N]. Both dynamic loading experiments and clamping experiments on ex-vivo tissues and in-vivo animal for tissue resection were implemented to validate the effectiveness of the proposed design.

A sub-millimetric, 0.25 mN resolution fully integrated fiber-optic force-sensing tool for retinal microsurgery

A submillimetric 3-DOF force sensing instrument with integrated fiber Bragg grating for retinal microsurgery

Optical Micro/Nanofiber-Enabled Compact Tactile Sensor for Hardness Discrimination.

FBG-based three-dimensional micro-force sensor with axial force sensitivity-enhancing and temperature compensation for micro-forceps

An FBG-Based 3-DOF Force Sensor With Simplified Structure for Retinal Microsurgery

A Micro‐3‐Degree‐of‐Freedom Force Sensor for Intraocular Dexterous Surgical Robots

FBG-Based Sensorized Surgical Instrument for Force Measurement in Minimally Invasive Robotic Surgery

Exploring the Needle Tip Interaction Force with Retinal Tissue Deformation in Vitreoretinal Surgery

Development of a Fiber Bragg Grating-Enabled Clamping Force Sensor Integrated on a Grasper for Laparoscopic Surgery

Monolithic integrated optoelectronic chip for vector force detection

Identification of tissue types and boundaries with a fiber optic force sensor

Development of a Distal Tri-Axial Force Sensor for Minimally Invasive Surgical Palpation

Thin-film-based optical fiber interferometric sensor on the fiber tip for endovascular surgical procedures

A Miniature Triaxial Fiber Optic Force Sensor for Flexible Ureteroscopy

Multimode Proximal Force FBG-Based Sensors With High-Resolution for Catheter Surgical Robots

High-Sensitivity Microfiber Strain and Force Sensors

A Compact FBG-Based Triaxial Force Sensor With Parallel Helical Beams for Robotic-Assisted Surgery

A piezoresistive-based 3-axial MEMS tactile sensor and integrated surgical forceps for gastrointestinal endoscopic minimally invasive surgery

In-vivo studies on PDMS-embedded Fiber Bragg Grating based smart laparoscopic grasper

A Modular 3-Degree-of-Freedom Force Sensor for Robot-assisted Minimally Invasive Surgery Research

A Highly Integrated 3D MEMS Force Sensing Module With Variable Sensitivity for Robotic‐Assisted Minimally Invasive Surgery