Abstract:Recently, the utilization of lithium has increased significantly, particularly in high-tech industries such as nuclear, aerospace, automotive, battery, military, glass and ceramic, and lubricants. However, lithium recovery methods from brines present certain drawbacks, making lithium exploitation a global challenge. A comparative analysis of lithium recovery methods from brine solutions indicates that the adsorption method holds promising potential for separating lithium from low-concentration solutions. Despite this, the quest for an effective and efficient adsorbent for lithium-ion adsorption remains a challenge, necessitating the development of an adsorbent, using readily available materials. In this study, carbon-active underwent chemical modification. Notably, the co-precipitation method was employed for the first time to create a composite adsorbent decorated with manganese dioxide (MnO 2 ). Various analyses, including XRD, SEM-EDS, FTIR, and BET, were conducted to elucidate the structural, morphological, physical, and chemical properties of the adsorbent. This synthesized adsorbent was applied to the adsorption of lithium from an aqueous sample. Exploration of adsorption parameters affecting capacity led to the identification of optimal conditions: 14-hour duration, an adsorbent dosage of 0.02 g, and an ambient temperature of 25°C, in a lithium solution with a concentration of 60.4 ppm. Under these conditions, the maximum adsorption capacity of the adsorbent was determined to be 30.5 mg/g. Based on experimental results, kinetic and adsorption isotherm models were investigated. The Pseudo-quadratic kinetic model, with an R 2 value of 0.999, emerged as the most suitable for describing the adsorbent's behavior. The Hill isotherm model with R2 = 0.9634 is the most appropriate isotherm model to describe the adsorbent behavior. Additionally, the selectivity of the adsorbent in the presence of other ions was investigated. The adsorbent's reusability was examined, and after two recycling periods, the adsorbent maintained an efficiency of up to 88%, demonstrating its stability. The CAC-MnO2-P composite adsorbent shows technical and economic promise for industrial use in lithium-ion recovery processes.

Tunnel manganese oxides prepared using recovered LiMn2O4 from spent lithium-ion batteries: Co adsorption behavior and mechanism

Recovery of Li and Co in Waste Lithium Cobalt Oxide-Based Battery Using H1.6Mn1.6O4

Synthesis of MnO2 derived from spent lithium-ion batteries via advanced oxidation and its application in VOCs oxidation

Development of a Manganese Dioxide-Decorated Activated Carbon Nano-sorbent via Co-precipitation method for efficient lithium ion adsorption from aqueous solutions

Manganese ion oxidation precipitation method for the recycling and reusing of LiNi<sub>0.8</sub>Co<sub>0.05</sub>Mn<sub>0.15</sub>O<sub>2</sub> materials for lithium-ion batteries

Recycling of spent lithium-ion batteries: Selective ammonia leaching of valuable metals and simultaneous synthesis of high-purity manganese carbonate

Separation of Co and Mn from acetic acid leaching solution of spent lithium-ion battery by Cyanex272

Extraction of Lithium from Single-Crystalline Lithium Manganese Oxide Nanotubes Using Ammonium Peroxodisulfate

Study on the Synthesis of LiCoO2 from Spent Li-Ion Batteries

Highly efficient and selective extraction of Li+ from high sodium lithium containing wastewater using manganese series adsorbent

Preparation of LiNi1/3Co1/3Mn1/3O2 cathode materials from spent Li-ion batteries

A combined process for cobalt recovering and cathode material regeneration from spent LiCoO2 batteries: Process optimization and kinetics aspects

Preferential Extraction of Lithium from Spent Cathodes and the Regeneration of Layered Oxides for Li/Na-Ion Batteries

Co-Precipitation of Metal Oxalates from Organic Leach Solution Derived from Spent Lithium-Ion Batteries (LIBs)

Selective Extraction of Transition Metals from Spent LiNix Coy Mn1-x-y O2 Cathode via Regulation of Coordination Environment

Synthesis and Recyclability of Sheet-like Cobalt Carbonate Recovered from Spent Li-Ion Batteries Using a Simple Hydrometallurgy Process

Eco-Friendly Recycling of Lithium Batteries for Extraction of High-Purity Metals

Practical synthesis of manganese oxide MnO2·0.5H2O for an advanced and applicable lithium ion-sieve

Study of Extraction and Purification of Ni, Co and Mn from Spent Battery Material

Toward Sustainable Li-Ion Batteries Recycling: Green MOF as a Molecular Sieve for the Selective Separation of Cobalt and Nickel

Sustainable recovery of valuable metals from spent lithium-ion batteries using DL-malic acid: Leaching and kinetics aspect