Abstract:Mode division multiplexing on chips can enhance optical interconnect capacity tremendously, avoiding expensive wavelength division multiplexing technology. It is a critical functionality to switch or process different mode channels together for future optical network-on-chip based on mode division multiplexing. However, controlling different modes simultaneously in the traditional wide multimode waveguide is very difficult due to very different optical properties of the modes. Here, we introduce a novel concept to realize compact multimode 3 dB couplers, which can process multiple modes of a densely-packed waveguide array bus waveguide simultaneously. A dual-mode 3 dB coupler with two input and two output bus waveguides, each of which supports two transverse electrical modes, is designed with simulated insertion losses of less than 0.23 dB and crosstalks of similar to-18.1 dB for both modes at the central wavelength. The relative phases at the two outputs are 90 degrees for both modes theoretically. The designed device has a short coupling length of 21 mu m with SiO2 cladding. The fabricated one demonstrates insertion losses of similar to 0.3 dB and similar to 0.5 dB and crosstalks of -19.6 dB and -14.1 dB for the two modes, respectively. A triple-mode 2 x 2 3 dB coupler, consisting of six coupled waveguides in the coupling region of 87 mu m length, shows average insertion losses and crosstalks for all three modes of similar to 0.25 dB and similar to-14 dB, respectively. The present design method is also extended to 3 dB couplers for more modes theoretically.

Compact and low-crosstalk multimode waveguide crossing utilizing subwavelength holey metamaterial waveguides

Reducing crosstalk between nanowire-based hybrid plasmonic waveguides

Compact and broadband dual-polarization waveguide crossing utilizing subwavelength-hole-assisted MMI couplers

5×5 Μm2 Compact Waveguide Crossing Optimized by Genetic Algorithm

Metamaterial‐Based Maxwell's Fisheye Lens for Multimode Waveguide Crossing

High performance ultra-compact SOI waveguide crossing.

Compact Dual-Mode Waveguide Crossing Based on Subwavelength Gratings Assisted Multimode-Interference Couplers

Hybrid plasmonic waveguide crossing based on the multimode interference effect

Multifunctional Optical Waveguide Chips

Compact Dual-Mode Waveguide Crossing Based on Adjoint Shape Optimization.

Dual-Mode Waveguide Crossing Utilizing Taper-Assisted Multimode-Interference Couplers

Ultra-compact high efficiency and low crosstalk optical interconnection structures based on inverse designed nanophotonic elements

Ultra-Low Loss and Ultra-Compact Polarization-Insensitive SOI Multimode Waveguide Crossing Based on an Inverse Design Method

Low-Loss Waveguide Crossing for Complicated On-Chip Microwave Photonic Processor

Compact waveguide devices based on multimode interference by using area modulation method

A Compact and Polarization-Insensitive Silicon Waveguide Crossing Based on Subwavelength Grating MMI Couplers

Series of Ultra-Low Loss and Ultra-Compact Multichannel Silicon Waveguide Crossing

Low-loss 3-dimensional waveguide crossing with a parabolic taper interlayer coupler based on a SiN-SiN-Si three-layer platform

Asymmetric Plasmonic-Dielectric Coupler with Short Coupling Length, High Extinction Ratio, and Low Insertion Loss.

Multimode 3 Db Coupler Based on Symmetrically Coupled Waveguides for On-Chipbrk Mode Division Multiplexing

On-chip Wavefront Shaping in Spacing-Varied Waveguide Arrays