Research on the Water Absorption and Release Characteristics of a Carbonized γ-C2S Lightweight Aggregate in Lightweight and High-Strength Concrete
Zi Yu,Chenxi Liu,Jinhui Li,Jing Wu,Xueting Ma,Yugui Cao,Jierong Cao,Weiheng Xiang,Hua Wang,Qingjun Ding
DOI: https://doi.org/10.3390/coatings14081056
IF: 3.236
2024-08-19
Coatings
Abstract:Lightweight aggregate concrete, known for its light weight, thermal insulation, and excellent durability, has garnered significant attention and is considered an ideal material for lightweight ultra-high-performance concrete. Previous research has discovered that prewetting lightweight aggregates can continuously release water during the setting and hardening process of concrete, providing internal curing. However, the moisture release behavior of prewetted lightweight aggregates under different temperature and humidity conditions, as well as their internal curing mechanisms in low water–cement ratio mixtures, remains unclear and requires further investigation. In response to environmental sustainability, this study utilizes industrial waste γ-C2S to produce a high-strength carbonized γ-C2S lightweight aggregate (CC) and primarily compares the water absorption and release characteristics of three different types of lightweight aggregates, focusing on the influence of curing temperature and humidity on the water release behavior of the prewetted CC and establishing a water release model for the prewetted CC in cement-based materials. The experimental results indicate that the water absorption rates of the self-made high-performance lightweight aggregate (CC), magnesian lightweight aggregate (MC), and shale lightweight aggregate (SC) conform to the typical Boxlucas equation. In an air environment, the CC has the longest water release duration, followed by the MC, with the SC being the fastest. The water storage performance of the prewetted SC was poor, while the 100% prewetted CC exhibited better water storage during the mixing stage. When the CC is 100% prewetted, it can significantly increase the free water content in the interfacial transition zone, aiding in the hydration of the interfacial transition zone and enhancing the efficiency of shrinkage compensation by the expansive agent. This improvement contributes to the mechanical strength and volumetric stability of cement-based materials.
materials science, multidisciplinary,physics, applied, coatings & films