Abstract:To investigate the influence of group studs stiffness on the behavior of accelerated construction steel-concrete composite small box girder bridge, experimental test and finite element analysis were conducted on a steel-concrete composite small box girder with group studs. First, a finite element model of a steel-concrete composite girder was established by adopting the shell elements and spring elements, in which the spring element stiffness of group studs came from analytical results of the studied push out test specimens in terms of parameters of group studs arrangement. The values gained by FEM model were good agreement with the test values of the small box girder and confirmed that the numerical method is reasonable and right. The steel-concrete composite girder bridge has powerful recovery capability under elastic loading. It also showed that the connecting the steel girder with concrete plate by using the group studs in the accelerated construction steel-concrete composite small box girder bridges was completely feasible. Secondly, accelerated construction steel-concrete composite small box girder bridges, composed of five small box girders, with 40 m standard span, 39.2 m computing span and 16 m width, were analyzed by the same numerical method. Under completely shear state in the normal service condition, the total stiffness of the group studs gradually increases with the increase of the transverse force effect on composite girder bridge, but it has little influence on the stresses and deflections in the key section of the steel-concrete composite small box girder bridge. But the stress and deflection of the steel-concrete composite small box girder bridge increases slightly with the decrease of shear connection when the design of the composite bridge no longer satisfied the complete shear conditions.

Transient bending properties of the FG concrete structures as the main part of bridge construction under external mechanical loading

EXPERIMENTAL STUDY ON FLEXURAL BEHAVIOR OF REINFORCED CONCRETE BEAMS PRE-STRESSED WITH CFRP TENDONS

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Remote Collaborative Pseudo-dynamic Testing of Carbon Fiber Reinforced Plastic Retrofitted Reinforcement Concrete Short Columns of Bridge

Time-dependent behavior of PC box girder bridges considering non-uniform shrinkage and creep

Study on Static and Dynamic Behavior of T-Frame Bridge Reinforced by External Tendons

Influence analysis of group studs stiffness in accelerated construction steel-concrete composite small box girder bridges

Experimental and Analytical Study of Hollow Section Concrete-Filled GFRP Tubes in Bending

Analysis of Ultimate Loading Capacity of the Prestressed Concrete Curved Bridge

Static and Dynamic Behavior of Continuous Box Girder Bridge and Its Experimental Investigation

Coupled Effect of Loading and Environment of Concrete Bridge in Service Life

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

Experimental Testing of A Smart Frp-Concrete Composite Bridge Superstructure

Dynamic performance of a concrete-filled steel tube high-pier curved continuous truss girder bridge due to moving vehicles

Analysis of Static and Dynamic Behaviors of Continuous Rigid Frame Bridge with V-Shaped Piers and Seismic Response

Load Test Analysis of a Long-Span Prestressed Nano-Concrete Highway Bridge

Experimental study on failure mechanism of prestressed concrete T girder

Performance degradation prediction of extra-wide concrete self-anchored suspension bridge under vehicle load considering time-dependent effects

Flexural behavior of concrete-filled rectangular steel tubular composite truss beams in the negative moment region