Abstract:The presence of abundant clay components and microporous structure in shale results in its high hydrophilicity, making a water-rich environment inevitable in petroleum exploration projects. Therefore, it is crucial to consider the influence of bedding structure, moisture content, confining pressure, and their combined effects on the geomechanical properties of shale. This article aims to investigate the mechanical properties of deep shale under varying water content conditions, elucidate the failure mode and failure mechanism of shale in actual engineering scenarios, and explores the interplay between stress, structure, moisture content, and other factors on its mechanical properties. The evaluation of wellbore stability and fracture propagation effects is proposed based on laboratory experiments using triaxial stress and strain data, along with the application of energy evolution theory. The experimental procedures encompass an analysis of shale's microscopic components and structure, as well as anisotropic shale triaxial compression tests conducted under different moisture contents and confining pressures. The results demonstrate that shale exhibits dense pores in its microstructure and displays pronounced anisotropic characteristics in its macrostructure. The presence of water within these pores, combined with the in situ stress within the formation, significantly influences the mechanical properties of shale. This anisotropy decreases with increasing moisture content, but the mechanical performance still decreases. Under triaxial compression conditions, the increase in confining pressure to some extent enhances the anisotropy of shale's deformation characteristics, which is related to the failure modes of shale. However, the detrimental effect of moisture content on shale's mechanical properties still persists. In order to quantify the impact of these factors, this study utilizes the elastic modulus as an indicator of the coupling effect. It combines the triaxial strain curve obtained from laboratory tests and proposes an evaluation index for shale mechanical properties based on the energy evolution theory. This index is suitable for assessing wellbore stability (the stability index called SI r ) and crack expansion (the brittleness index called BI r ). The calculation results reveal that, during the wellbore drilling process, excavating parallel to the direction of shale bedding while maintaining low moisture content and high confining pressure yields a higher SI r value, indicating better wellbore stability. On the other hand, during reservoir fracturing, fracturing perpendicular to the shale bedding direction and maintaining low confining pressure and moisture content result in a smaller BI r value. This approach is more beneficial for the expansion of shale fracture network in engineering.

Mechanical response and energy evolution of interbedded shales subjected to multilevel constant/increasing-amplitude cyclic loading

Study on the nonlinear time-dependent deformation characteristics and viscoelastic-plastic model of shale under direct shear loading path

Experiment and DEM simulation study on mechanical behaviors of shale under triaxial cyclic loading and unloading conditions

Anisotropic characteristics of acoustic emission and the corresponding multifractal spectrum during progressive failure of shale under cyclic loading

Discrete element simulation on failure mechanical behavior of transversely isotropic shale under two kinds of unloading paths

Effects of Loading Rate on Fracture Modes and Acoustic Emission Characteristics of Interbedded Shale Under Tension

Experimental Investigation of the Mechanical Properties and Energy Evolution of Layered Phyllite Under Uniaxial Multilevel Cyclic Loading

Mixed-mode fracture behavior in deep shale reservoirs under different loading rates and temperatures

Anisotropic Characterization of Mechanical Behavior and Fracture Morphology in Marine and Continental Shales under Uniaxial Compression: A Comparative Analysis

Investigation of the anisotropic mechanical response of layered shales

Combined Effect of In Situ Stress Level and Bedding Anisotropy on Hydraulic Fracture Vertical Growth in Deep Marine Shale Revealed via CT Scans and Acoustic Emission

Experiment Study on Damage Properties and Acoustic Emission Characteristics of Layered Shale under Uniaxial Compression

Study on mechanical properties and energy characteristics of carbonaceous shale with different fissure angles under dry–wet cycles

Study on failure characteristics and evaluation index of aquifer shale based on energy evolution

Experimental and damage model study of layered shale under different moisture contents

Behavior of transversely isotropic shale observed in triaxial tests and Brazilian disc tests

Effects of cyclic loading and unloading rates on the energy evolution of rocks with different lithology

Effects of Fatigue Load Amplitude on the Mechanical and Energy Evolution Characteristics of Stratified Rock Mass under Triaxial Cyclic Loading and Unloading Conditions

Study on the Evolution of Mechanical Properties and Acoustic Emission of Medium-Permeability Sandstone under Multi-Level Cyclic Loading Stress Paths

Investigation on Mechanical Properties, AE Characteristics, and Failure Modes of Longmaxi Formation Shale in Changning, Sichuan Basin, China

Effect of height-diameter ratio on the mechanical characteristics of shale with different bedding orientations