Abstract:The mechanical properties of shale are generally influenced by in situ geological conditions. However, the understanding of the effects of in situ geological conditions on the mechanical properties of shale is still immature. To address this problem, this paper provides insight into the elasticity and characteristic stress thresholds (i.e., the crack closure stress σcc, crack initiation stress σci, and crack damage stress σcd) of shales with differently oriented bedding planes under deep in situ geological conditions. To accurately determine the elastic parameters and crack closure and initiation thresholds, a new method-i.e., the bidirectional iterative approximation (BIA) method-which iteratively approaches the upper and lower limit stresses of the linear elastic stress-strain regime, was proposed. Several triaxial compression experiments were performed on Longmaxi shale samples under coupled in situ stress and temperature conditions reflecting depths of 2000 and 4000 m in the study area. The results showed that the peak deviatoric stress (σp) of shale samples with the same bedding plane orientation increases as depth increases from 2000 m to 4000 m. In addition, the elastic modulus of the shale studied is more influenced by bedding plane orientation than by burial depth. However, the Poisson's ratios of the studied shale samples are very similar, indicating that for the studied depth conditions, the Poisson's ratio is not influenced by the geological conditions and bedding plane orientation. For the shale samples with the two typical bedding plane orientations tested (i.e., perpendicular and parallel to the axial loading direction) under 2000 and 4000 m geological conditions, the ratio of crack closure stress to peak deviatoric stress (σcc/σp) ranges from 24.83% to 25.16%, and the ratio of crack initiation stress to peak deviatoric stress (σci/σp) ranges from 34.78% to 38.23%, indicating that the σcc/σp and σci/σp ratios do not change much, and are less affected by the bedding plane orientation and depth conditions studied. Furthermore, as the in situ depth increases from 2000 m to 4000 m, the increase in σcd is significantly greater than that of σcc and σci, indicating that σcd is more sensitive to changes in depth, and that the increase in depth has an obvious inhibitory effect on crack extension. The expected experimental results will provide the background for further constitutive modeling and numerical analysis of the shale gas reservoirs.

Effect of height-diameter ratio on the mechanical characteristics of shale with different bedding orientations

Experimental research on anisotropic properties of shale

Combined Effect of In Situ Stress Level and Bedding Anisotropy on Hydraulic Fracture Vertical Growth in Deep Marine Shale Revealed via CT Scans and Acoustic Emission

Experimental and Numerical Study of the Effects of Layer Orientation on the Mechanical Behavior of Shale

3D anisotropic microcracking mechanisms of shale subjected to direct shear loading: A numerical insight

Behavior of transversely isotropic shale observed in triaxial tests and Brazilian disc tests

Study on the induced effect of bedding weakness in deep shale gas reservoir on hydraulic fractures propagation

Role of bedding plane in the relationship between Mode-I fracture toughness and tensile strength of shale

Anisotropic Characterization of Mechanical Behavior and Fracture Morphology in Marine and Continental Shales under Uniaxial Compression: A Comparative Analysis

Experimental and Numerical Investigation of the Effect of Bedding Layer Orientation on Fracture Toughness of Shale Rocks

Elasticity and Characteristic Stress Thresholds of Shale under Deep In Situ Geological Conditions

Discrete element simulation on failure mechanical behavior of transversely isotropic shale under two kinds of unloading paths

Dynamic impact experimental and global cohesive element method to shale fracture characterization

Effects of Strain Rate and Bedding on Shale Fracture Mechanisms

Experimental Investigation on the 3D Anisotropic Fracture Behavior of Layered Shales Under Mode-I Loading

Anisotropic dynamic and static mechanical properties of organic-rich shale: The influence of stress

ANISOTROPY OF SHEAR STRENGTH OF SHALE BASED ON DIRECT SHEAR TEST

Acoustic and fractal analyses of the mechanical properties and fracture modes of bedding‐containing shale under different seepage pressures

Research on the anisotropic fracture behavior and the corresponding fracture surface roughness of shale

Impacts of bedding angle and cementation type of bedding planes on mechanical behavior of thin-layer structured bedded rocks under uniaxial compression

Fracture Toughness Testing of Brittle Laminated Geomaterials Using Hollow Double-Wing Slotted Specimens