Abstract:To study the anisotropic mechanical properties and energy evolution of layered rock masses under the action of cyclic loading, uniaxial graded cyclic loading and unloading tests under different upper and lower stress limits were carried out on samples with different bedding angles (0°, 22.5°, 45°, 67.5°, and 90°) to explore the deformation and mechanical response characteristics of bedded phyllite under cyclic loading and the mechanism controlling the evolution of the total absorption energy, elastic strain energy, and dissipated energy. The damage variable D and the damage increment ΔD were introduced to characterize the damage accumulation state inside the layered rock mass, and an instability criterion of bedded phyllite under mechanical cyclic loading was proposed. The results show that when the bedding angle increases from 0° to 90°, the failure types of the sample change from splitting shear failure to slipping shear failure and then to splitting tensile failure, and the corresponding irreversible strain and deformation modulus first decrease and then increase. With increasing stress level, the cumulative energy density increases in three stages, and the rate of increase presents a change in characteristic of "accelerating-steady-decelerating." The energy storage coefficient ( K e ) decreases with increasing cycle number and stress level and first increases and then decreases with increasing bedding angle. Meanwhile, the energy dissipation coefficient ( K d ) exhibits the opposite trend. The damage increment increases ΔD sharply after the first cycle in the nonfailure stage, drops sharply in the next cycle, and gradually decreases and stabilizes to near ΔD = 0.01 in the subsequent cycle. After entering the failure stage, the change in the damage increment of the variation in phyllite samples with different bedding angles is closely related to the stress level and number of cycles. The damage variable D can be used to describe the failure and instability of bedded phyllite under graded cyclic loading: when D ≤ 2 × 10 –4 , the rock is in the stage of compaction and steady crack growth; when D ≥ 2 × 10 –4 , the rock is at risk of failure and instability.

Experimental Investigation of the Mechanical Properties and Energy Evolution of Layered Phyllite Under Uniaxial Multilevel Cyclic Loading

Energy evolution and macro-micro failure mechanisms of frozen weakly cemented sandstone under uniaxial cyclic loading and unloading

Energy evolution mechanism of the mechanical and creep properties of layered phyllite under uniaxial compression and creep tests

Deformation Behaviour and Damage Evolution of Carbonaceous Phyllite under Cyclic Triaxial Loading

Study on physico‐mechanical characterization of rock-like material with bedding planes under coupled static and dynamic cyclic loadings

Experimental Study of Energy Evolution at a Discontinuity in Rock under Cyclic Loading and Unloading

Effects of cyclic loading and unloading rates on the energy evolution of rocks with different lithology

Transversely isotropic creep characteristics and damage mechanism of layered phyllite under uniaxial compression creep test and its application

Study of Impact Dynamic Characteristics and Damage Morphology of Layered Rock Mass

Energy Evolution and Damage Characteristics of Rock Materials under Different Cyclic Loading and Unloading Paths

Experimental study on dynamic fatigue properties of dolomite samples under triaxial multilevel cyclic loading

Investigation into the degradation patterns of the physical and mechanical characteristics of phyllite within a hydrothermal environment

Mechanical response and energy evolution of interbedded shales subjected to multilevel constant/increasing-amplitude cyclic loading

Experimental study of energy dissipation characteristics and crack coalescence modes of cracked sandstone under different cyclic loading paths

Effect of prior cyclic damage on rock failure exposed to triaxial multistage unloading confining pressure and cyclic loads

Anisotropic Mechanical Behavior of Stratified Sandstone Subjected to Cyclic Loading

Evolution of Deformation Failure and Energy of Siltite and Significant Shear Fracture Structure Under Cyclic Loading

Experimental research on the mechanical and acoustic emission properties of layered sandstone during tensile failure

Experimental Study of Mechanical Behavior of Interlayer Staggered Zone under Cyclic Loading and Unloading Condition

Effects of Acoustic Emission and Energy Evolution of Rock Specimens Under the Uniaxial Cyclic Loading and Unloading Compression

Energy Evolution Characteristics and Weak Structure-“Energy Flow” Impact Damaged Mechanism of Deep-Bedded Sandstone