Abstract:Open-phase fault (OPF) in the permanent magnet synchronous machine (PMSM) drive system is one of the most prevalent failures due to the resulting large electromagnetic torque ripples and serious mechanical vibration. To improve the reliability of the PMSM drive system, several OPF diagnosis methods were studied and were mainly focused on vector control system. Recently, model predictive control (MPC) has been emerging as a popular control method for the PMSM drive system owing to its simple structure and excellent dynamic performance. However, so far, there are no special OPF diagnosis methods for the model predictive controlled PMSM drive system. Hence, this article first proposes a cost function-based OPF diagnosis method for the model predictive controlled PMSM drive system, considering the characteristics of MPC system. The dc component and second harmonic component in the cost function are used for the OPF diagnosis, and the initial phase angle differences are defined to locate the faulty phase. The experimental results show that, by the proposed fault diagnosis method, not only the OPF can be rapidly detected, but also the faulty phase can be effectively located. Moreover, the proposed method can be implemented simply and is robust against the operating point and parameter variations of the PMSM drive system. This article proposes an OPF diagnosis method for the model predictive controlled PMSM drive system based on cost function, taking into account the characteristics of the MPCC system. The experimental results verify the effectiveness of the proposed method. From the theoretical analysis and experimental results, the following works and conclusion are drawn.

Diagnosis of Open-Phase Faults for a Five-Phase PMSM Fed by a Closed-Loop Vector-Controlled Drive Based on Magnetic Field Pendulous Oscillation Technique

A Simple and Efficient Strategy for Online Detection of Multiple Open-Switch Fault in Multiphase Machine Drive Systems

High-Resistance Connection Diagnosis in Five-Phase PMSMs Based on the Method of Magnetic Field Pendulous Oscillation and Symmetrical Components

Open Circuit Fault Diagnosis of Five Phase Permanent Magnet Synchronous Motor Drive System Based on Hybrid Logic Dynamic Model

Single- and Two-Phase Open-Circuit Fault Tolerant Control for Dual Three-Phase PM Motor Without Phase Shifting

Cost Function-Based Open-Phase Fault Diagnosis for PMSM Drive System With Model Predictive Current Control

Control of Dual Three-Phase Permanent Magnet Synchronous Motor under Open Phase Fault Conditions

Open-Circuit Fault Diagnosis of Six-Phase Permanent Magnet Synchronous Motor Drive System Based on Empirical Mode Decomposition Energy Entropy

Repetitive Control Based Phase Voltage Modulation Amendment for FOC-Based Five-Phase PMSMs under Single-Phase Open Fault.

Fault Tolerant Control of a Multiphase Motor with Non-Sinusoidal Source under Open-Phase Conditions

Current Prediction-Based Fast Diagnosis of Electrical Faults in PMSM Drives

Stator Inter-Turn Fault Detection in Closed-Loop Controlled Drive Based on Switching Sideband Harmonics in CMV

Sensorless control for five-phase PMSMs under normal and open-circuit fault conditions using super-twisting sliding mode observers

Multiple Open-Switch Fault Diagnosis for Five-Phase Permanent Magnet Machine Utilizing Currents in Stationary Reference Frame

An Embedded Fault-Tolerant Control Method for Single Open-Switch Faults in Standard PMSM Drives

Real‐time open‐switch fault diagnosis in automotive permanent magnet synchronous motor drives based on Kalman filter

Single-phase fault diagnosis for five-phase permanent magnet synchronous motors based on neutral voltage observation

An Open-Circuit Fault Detection Method of PMSM Fed by Dual Inverter with High Robustness

A Novel Open-Circuit Fault Detection and Location for Open-End Winding PMSM Based on Differential-Mode Components

A Novel Fault Detection of Igbt Open – Circuit Failure in Five-Phase Open-End Winding PMSM Drive System

A Novel Diagnostic Method for Single and Dual Power Switch Open-Circuit Faults of Six-Phase FTPMSM System even in Fault Tolerant Operation