Abstract:Open-phase fault (OPF) in the permanent magnet synchronous machine (PMSM) drive system is one of the most prevalent failures due to the resulting large electromagnetic torque ripples and serious mechanical vibration. To improve the reliability of the PMSM drive system, several OPF diagnosis methods were studied and were mainly focused on vector control system. Recently, model predictive control (MPC) has been emerging as a popular control method for the PMSM drive system owing to its simple structure and excellent dynamic performance. However, so far, there are no special OPF diagnosis methods for the model predictive controlled PMSM drive system. Hence, this article first proposes a cost function-based OPF diagnosis method for the model predictive controlled PMSM drive system, considering the characteristics of MPC system. The dc component and second harmonic component in the cost function are used for the OPF diagnosis, and the initial phase angle differences are defined to locate the faulty phase. The experimental results show that, by the proposed fault diagnosis method, not only the OPF can be rapidly detected, but also the faulty phase can be effectively located. Moreover, the proposed method can be implemented simply and is robust against the operating point and parameter variations of the PMSM drive system. This article proposes an OPF diagnosis method for the model predictive controlled PMSM drive system based on cost function, taking into account the characteristics of the MPCC system. The experimental results verify the effectiveness of the proposed method. From the theoretical analysis and experimental results, the following works and conclusion are drawn.

Current Prediction-Based Fast Diagnosis of Electrical Faults in PMSM Drives

Detection of Inter-Turn Short Circuit Fault for Dual Three-Phase PMSM Based on Vector Space Decomposition Scheme

A Simple and Efficient Strategy for Online Detection of Multiple Open-Switch Fault in Multiphase Machine Drive Systems

Fault diagnosis scheme for open-circuit faults in switched reluctance motor drives using fast Fourier transform algorithm with bus current detection

Cost Function-Based Open-Phase Fault Diagnosis for PMSM Drive System With Model Predictive Current Control

Diagnosis of Open-Phase Faults for a Five-Phase PMSM Fed by a Closed-Loop Vector-Controlled Drive Based on Magnetic Field Pendulous Oscillation Technique

An Embedded Fault-Tolerant Control Method for Single Open-Switch Faults in Standard PMSM Drives

A Novel Adaptive SMO-Based Simultaneous Diagnosis Method for IGBT Open-Circuit Faults and Current Sensor Incipient Faults of Inverters in PMSM Drives for Electric Vehicles

Open-Circuit Fault Diagnosis of Six-Phase Permanent Magnet Synchronous Motor Drive System Based on Empirical Mode Decomposition Energy Entropy

A Fast and Robust Open-Switch Fault Diagnosis Method for Variable-Speed PMSM System

A Generalized, Fast and Robust Open-Circuit Fault Diagnosis Technique for Star-connected Symmetrical Multiphase Drives

Diagnosis of High-Resistance Connection Faults in PMSMs Based on GMR and Deep Learning

Diagnosis and Tolerance of Common Electrical Faults in T-Type Three-Level Inverters Fed Dual Three-Phase PMSM Drives

Generalized Fault-Tolerant Model Predictive Control of Five-Phase PMSM Drives Under Single/Two Open-Switch Faults

Single- and Two-Phase Open-Circuit Fault Tolerant Control for Dual Three-Phase PM Motor Without Phase Shifting

Detection of Stator Winding Faults in PMSMs Based on Second Harmonics of Phase Instantaneous Reactive Powers

Control of Dual Three-Phase Permanent Magnet Synchronous Motor under Open Phase Fault Conditions

Real‐time open‐switch fault diagnosis in automotive permanent magnet synchronous motor drives based on Kalman filter

Fault Diagnosis of PMSM Drives Based on Digital Twin Modeling

A strong robustness open-circuit fault diagnosis strategy for novel fault-tolerant electric drive system based on d-q-axis current signal

Multiple Open-Switch Fault Diagnosis for Five-Phase Permanent Magnet Machine Utilizing Currents in Stationary Reference Frame