Abstract:Vanadium oxides are a promising class of cathode materials for rechargeable aqueous zinc-ion batteries (ZIBs). However, the intrinsically low electrical conductivity and unstable structure of vanadium materials often lead to fast performance degradation. In this work, we report on potassium-rich preintercalated vanadium oxide (K1.1V3O8) as a high-performance cathode material for ZIBs. The K1.1V3O8 cathode exhibits a high specific capacity of 386 mAh g–1 at 0.1 A g–1 and good long-term cycling stability with a capacity retention of 114.9% (180.7 mAh g–1) after 10 000 cycles at 10 A g–1. The DFT calculations reveal a low Zn diffusion barrier and low Bader charge of K in K1.1V3O8, which are responsible for its good rate capability and high storage performance. The demonstration approach of maximizing ZIB performance proves to be an effective way to design promising cathode materials for ZIBs by regulating the appropriate preintercalation metal ions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00625?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00625</a>.Kinetics analysis of the energy storage reaction; DFT computational methods; The electrochemical reactions of KVO cathode; Crystal structures of active materials (Figure S1); The FTIR spectrum of LiVO, NaVO, and KVO (Figure S2); XRD, SEM, HRTEM and STEM of LiVO (Figure S3); XRD, SEM, HRTEM and STEM of NaVO (Figure S4); XPS of LiVO and NaVO (Figure S5); CV curves and GCD of LiVO and NaVO (Figure S6); CV curves and GCD of CNT (Figure S7); The Nyquist plots of LiVO, NaVO and KVO based electrodes before and after cycling in two electrode configuration (Figure S8–S9); The cycling performance of LiVO, NaVO and KVO electrodes (Figure S10); The contribution ratio of capacitive process calculated from CV curves of KVO (Figure S11); The Nyquist plots of LiVO, NaVO and KVO in the three-electrode configuration (Figure S12); The electrochemical performance of KV3O8 electrode (Figure S13); TEM image, HRTEM image with SAED pattern, and STEM elemental mapping of KVO discharged to 0.2 V (Figure S14); The intercalation process of Zn2+ into the V–O interlayer spacing of KVO (Figure S15); The intercalation process of Zn2+ into the V–O interlayer spacing of LiVO and NaVO (Figure S16); The intercalation process of H+ into the V–O interlayer spacing of LiVO, NaVO and KVO (Figure S17) (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00625/suppl_file/nz1c00625_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Phase‐Stabilized Crystal Etching to Unlock An Oxygen‐Vacancy‐Rich Potassium Vanadate For Ultra‐Fast Zn Storage

Potassium Ammonium Vanadate with Rich Oxygen Vacancies for Fast and Highly Stable Zn-Ion Storage.

Rich Alkali Ions Preintercalated Vanadium Oxides for Durable and Fast Zinc-Ion Storage

Synergetic Effect of Alkali‐Site Substitution and Oxygen Vacancy Boosting Vanadate Cathode for Super‐Stable Potassium and Zinc Storage

Bi-intercalated Vanadium Pentoxide Synthesized Via Hydrogen Peroxide-Induced Phase Transition for Highly Stable Cathode in Aqueous Zinc Ion Batteries

Bi-intercalated vanadium pentoxide synthesized by hydrogen peroxide-induced phase transition for highly stable cathode of aqueous zinc ion batteries

Potassium Vanadates with Stable Structure and Fast Ion Diffusion Channel As Cathode for Rechargeable Aqueous Zinc-Ion Batteries

Facile Synthesis of Oxygen-Vacancy-Rich Li–K Coinsertion Vanadate Nanoflakes for High-Performance Zn-Ion Batteries

Drastically Promoting Rate Capability via Dual‐Cations Intercalation of V2O5 Enabling Rapid Zinc‐Ion Storage

Vanadate‐Based Fibrous Electrode Materials for High Performance Aqueous Zinc Ion Batteries

Reconstructing Vanadium Oxide with Anisotropic Pathways for a Durable and Fast Aqueous K-Ion Battery

Oxygen-deficient ammonium vanadate/GO composites with suppressed vanadium dissolution for ultra-stable high-rate aqueous zinc-ion batteries

Manipulating Oxygen Vacancies to Spur Ion Kinetics in V2O5 Structures for Superior Aqueous Zinc‐Ion Batteries

Stepwise oxidation strategy for the synthesis of amorphous V2O5@V2CTx nanohybrid cathodes toward high-performance aqueous Zn-ion batteries

Iodine‐Mediated Defect Engineering of Vanadyl Phosphate Cathodes for High‐Performance Aqueous Zinc‐Ion Batteries

Expanding Layer Spacing of Carbon‐Coated Vanadium Oxide via Ammonium Ions for Fast Electrochemical Kinetics in Aqueous Zinc‐ion Batteries

High-performance zinc-ion batteries enabled by electrochemically induced transformation of vanadium oxide cathodes

3D Oxygen‐Defective Potassium Vanadate/Carbon Nanoribbon Networks As High‐Performance Cathodes for Aqueous Zinc‐Ion Batteries

Synergetic Effect of Mo-Doped and Oxygen Vacancies Endows Vanadium Oxide with High-Rate and Long-Life for Aqueous Zinc Ion Battery

Vanadium acid zinc induced by electrochemical self-optimization of oxygen-defect-rich vanadium trioxide with dual-types of carbon hybridization for accelerating zinc storage dynamics

Li+, Na+ co-stabilized vanadium oxide nanobelts with bilayer structure for boosted Zinc-ion storage performance