Abstract:This paper describes resonant wireless strain sensors fabricated from magnetoelastic alloys. The transduction mechanism is the $\Delta{\rm E}$ effect—the change in stiffness of magnetoelastic materials with applied strain or magnetic field. This is measured as a shift in the resonant frequency and is detected wirelessly using pick-up coils utilizing the magnetoelastic coupling of these materials. The sensors are fabricated from a 28- $\mu{\rm m}$ -thick foil of Metglas 2826 MB $({\rm Fe}_{40}{\rm Ni}_{\rm 38}{\rm Mo}_{\rm 4}{\rm B}_{18})$ , a ferromagnetic magnetoelastic alloy, using microelectrodischarge machining. Two sensor types are described—single and differential. The single sensor has an active area of 7 $\,\times\,$ 2 ${\rm mm}^{2}$ , excluding the anchors. At 23 $^{\circ}{\rm C}$ , it operates at a resonant frequency of 230.8 kHz and has a sensitivity of $13\times 10^{3}~{\rm ppm}/{\rm mstrain}$ ; the dynamic range is 0.05–1.05 mstrain. The differential sensor includes a strain independent reference resonator of area 2 $\,\times\,$ 0.5 ${\rm mm}^{2}$ in addition to a sensing element of area 2.5 $\,\times\,$ 0.5 ${\rm mm}^{2}$ that is divided into two segments. The sensor resonance is at 266.4 kHz and reference resonance is at 492.75 kHz. The differential sensor provides a dynamic range for 0–1.85 mstrain with a sensitivity of $12.5\times 10^{3}~{\rm ppm}/{\rm mstrain}$ at 23 $^{\circ}{\rm C}$ . The reference resonator of the differential sensor is used to compensate for the temperature dependence of the Young's modulus of Metglas 2826 MB, which is experimentally estimated to be ${-}{\rm 524}~{\rm ppm}/^{\circ}{\rm C}$ . For an increment of 35 $^{\circ}{\rm C}$ , uncompensated sensors exhibit a resonant frequency shift of up to 42% of the dynamic range for the single sensor and 30% of the dynamic range of the differential sensor, underscoring the necessity of temperature compensation. The geometry of both types of sensors can be modified to accommodate a variety of sensitivity and dynamic range requirements. $\hfill{[2013\hbox{-}0330]}$

Electro-Mechanical Resonant Magnetic Field Sensor

Design, Fabrication and Characterization of a Resonant Magnetic Field Sensor Based on Mechanically Coupled Dual-Microresonator

High Isolation, Double-Clamped, Magnetoelectric Microelectromechanical Resonator Magnetometer

Self-Biased 215mhz Magnetoelectric Nems Resonator for Ultra-Sensitive Dc Magnetic Field Detection

Ultra-sensitive magnetic field sensor based on a low-noise magnetoelectric MEMS-CMOS oscillator

Mems Resonant Magnetic Field Sensor Based On An Aln/F(E)G(A)B Bilayer Nano-Plate Resonator

Wireless Magnetoelastic Resonance Sensors: A Critical Review

Micro Magnetic Field Sensor Based on Terfenol-D/Pzt/Terfenol-D Magnetoelectric Composites

Electrostatic Charge Sensor Based on a Micromachined Resonator with Dual Micro-Levers

Passive Wireless Strain Sensors Using Microfabricated Magnetoelastic Beam Elements

Development of a Compliant Magnetic 3-D Tactile Sensor with AMR Elements.

Highly sensitive refractive-index sensor based on strong magnetic resonance in metamaterials

MEMS resonant magnetic field sensor based on an AlN/F<inf>e</inf>G<inf>a</inf>B bilayer nano-plate resonator

Bulk acoustic wave (BAW) resonator-based MEMS magnetic field sensor

A Highly Sensitive and High-Resolution Resonant MEMS Electrostatic Field Microsensor Based on Electrostatic Stiffness Perturbation

A pico-Tesla magnetic sensor with PZT bimorph and permanent magnet proof mass

Highly Sensitive DC Magnetic Field Sensor Based on Nonlinear ME Effect

A High Sensitivity Electric Field Microsensor Based on Torsional Resonance

Ultra-Sensitive Nems Magnetoelectric Sensor for Picotesla Dc Magnetic Field Detection

High-Resolution Magnetoelectric Sensor and Low-Frequency Measurement Using Frequency Up-Conversion Technique

High SNR magnetoelectric sensor with dual working modes for wideband magnetic field detection