Abstract:Abstract The sustainable development of the paint and varnish industry is a prerequisite for action to minimize the negative environmental impact of paint products. They consist not only in reducing the emission of harmful VOC substances into the atmosphere but also in modifying the composition of the paint material in order to improve the properties of the coatings and at the same time reduce the amount of waste. Selection of the appropriate composition of the water-borne composition is still a problem to be solved. Therefore, aqueous polymer dispersions of Arlberdingk AC 2514 containing an acrylic resin modified with an ionic liquid of didecyldimethylammonium nitrate (DDANO 3 ) were tested. Non-ionic surfactants (Rokanol L-10 and Rokacet S-24), polyurethane thickener (DSX 1514), and mineral thickener (bentonite) were also used for stabilization. The influence of individual components on changes in the stability and particle size of dispersion systems was investigated. Physicomechanical tests of coatings obtained from polymer dispersion systems were also performed. Studies have shown that with the increase in the amount of DDANO 3 in the system, the particle size of the varnish composition decreases and the gloss and relative hardness of the coatings decrease. The optimal amount of DDANO 3 in the dispersion is 1.5% w/w. DSX 1514 increased the stability, reduced the migration rate of the dispersion particles, and improved the elasticity and impact resistance of the protective membranes. It has been shown that the stability varies depending on the type of thickener and surfactant (SAA) used. SAA increases the value of the TSI (Turbiscan Stability Index), which takes the values of 3.8 (0.3 g bentonite) and 3.6 (0.6 g bentonite), respectively, with Rokanol L-10 16% w/w. Water-soluble acrylic resin with the tested additives can be potentially used for the production of stable dispersions with extended life.

Investigation of TiO 2 replacement alternatives for water-based paints using styrene butyl acrylate

Study on Air-Purifying Performance of Semi-Flexible Asphalt Samples Coated with Titanium Dioxide Using Different Methods

Study of Properties of Water-Dispersion Paint and Varnish Compositions with the Content of Modified Mineral Filler

Determination of early warning signs for photocatalytic degradation of titanium white oil paints by means of surface analysis

Assessing the Impact of Sepiolite-Based Bio-Pigment Infused with Indigo Extract on Appearance and Durability of Water-Based White Primer

Investigation of the properties of a water-based acrylic dispersion modified with an ionic liquid, surfactant, and thickener

The effect of modified titanium dioxide, silica, and zinc oxide on the self-cleaning property of an acrylic resin-based paint

Preparation of Nano Titanium Dioxide Using the Sol-Gel Method to Use in Friendly Environment Coatings

Spray-Deposited TiO2 Layers on Aluminum Foil for Sustainable Water Remediation

Synthesis and characterization of iron oxides and their application as inorganic pigments in white paint

Application of Infrared Reflective Pigment in Architectural Coatings

Formaldehyde degradation of waterborne paints over S- and C-doped titanium dioxide under visible light

Highly Stable Self-Cleaning Paints Based on Waste-Valorized PNC-Doped TiO 2 Nanoparticles

Photocatalytic Epoxy Paint Based on TiO2 for the Decontamination of Water under Visible LED and Sunlight Irradiation

Removal of graffiti paint from construction materials coated with TiO2-based photocatalysts

Indoor paint life cycle particle release: Safer-by-design products and the importance of choosing the right formula

Weathering study of dimer fatty acid cured epoxy paints

Controlling TiO2 photocatalytic behaviour via perhydropolysilazane-derived SiO2 ultrathin shell

High-concentration TiO2 suspension (>70 wt%) with low viscosity suitable for waterborne coatings

Self-Cleaning and Charge Transport Properties of Foils Coated with Acrylic Paint Containing TiO2 Nanoparticles