Abstract:In recent decades, numerous studies have indicated the substantial role semiconductors could play in photocatalytic processes for environmental applications. Materials that contain a semiconductor as a photocatalyst have a semi-permanent capacity for removing harmful gases from the ambient air. In this paper, the focus is on TiO2. Heterogeneous photocatalysis using TiO2 leads to the degradation of NO/NO2, benzene, toluene, and other priority air pollutants once in contact with the semiconductor surface. Preliminary evidence indicates that TiO2-containing construction materials and paints efficiently destroy the ozone precursors NO and NO2 by up to 80% and 30%, respectively. Therefore, the development of innovative coatings containing TiO2 as a photocatalyst was in the foreground of research activities. The aim of this was for coatings to be used as building and construction materials, mainly outdoors, e.g., on building façades on high-traffic roads for the degradation of priority air pollutants (NOx and volatile organic compounds) in the polluted urban atmosphere. Though there are advantages connected with the application of TiO2, due to its band gap of 3.2 eV, these are limited. TiO2 is effective only in the UV region (ca. 5%) of the solar spectrum with wavelengths λ < 380 nm. Hence, efforts are made here, as in many research studies, to dope TiO2 with transition metals to increase its activity using visible light, which will extend its application to indoor environments. In our studies, experiments were conducted with 0.1% (w/w) and 1% (w/w) Mn-TiO2 admixtures, and the ability of the modified photocatalysts to degrade NO by both solar and indoor illumination was evaluated. The surface chemistry at the air/catalyst interface, governed by the photoelectric characteristics of TiO2 and the formation of reactive oxygen species with co-occurring redox reactions, is reviewed in this paper. The factors affecting the application of TiO2 for the degradation of priority air pollutants as single compounds or mixtures are discussed. We investigated, particularly, the degradation of mixtures of priority compounds at typical concentrations in ambient air and confined spaces. This is a realistic approach, because pollutants are present as mixtures, rather than as individual compounds in ambient and indoor air. Moreover, organic polymers as paint constituents were found to be the primary source for carbonyl formation, e.g., formaldehyde, acetaldehyde, etc., during the heterogeneous photocatalytic processes conducted on TiO2-enriched coatings.

Highly Stable Self-Cleaning Paints Based on Waste-Valorized PNC-Doped TiO 2 Nanoparticles

Novel Effective Photocatalytic Self-Cleaning Coatings: TiO2-Polyfluoroalkoxy Coatings Prepared by Suspension Plasma Spraying

Self-Cleaning and Charge Transport Properties of Foils Coated with Acrylic Paint Containing TiO2 Nanoparticles

Solvothermal synthesis of stable nanoporous polymeric bases-crystalline TiO2 nanocomposites: visible light active and efficient photocatalysts for water treatment.

Single-crystalline Rutile TiO2 Nanorod Array on Flexible Ti Substrates for Efficient Photoelectrocatalytic Degradation of Phenol in Water

Surface modification and photocatalytic property of TiO2

Effect of Plasma Treatment on Self-Cleaning Features of Acrylic Paint/TiO2-Coated Surfaces for Environmental Pollutant Removal

Low Temperature Synthesis of Few-Layer Titanate Nanobelts on Ti Mesh and the Hot-Water Induced Transformations to Highly Photocatalytic Active Titania Nanorods

The effect of modified titanium dioxide, silica, and zinc oxide on the self-cleaning property of an acrylic resin-based paint

Tunable TiO2-BN-Pd nanofibers by combining electrospinning and atomic layer deposition to enhance photodegradation of acetaminophen

Dye-Sensitized Commercial TiO2 for the Construction of Robust Nanocoatings with the Enhanced Transmittance and Visible-Light-Activated Photocatalytic Self-Cleaning Properties

Self-cleaning durability assessment of TiO2/SiO2 photocatalysts coated concrete: Effect of indoor and outdoor conditions on the photocatalytic activity

Engineering high-efficient phosphorus-doped TiO 2 photocatalyst employed for a sophisticated visible-light driven photocatalytic coating

Preparation of photocatalytic TiO2-based self-cleaning coatings for painted surface without interlayer

Photo-Induced Degradation of Priority Air Pollutants on TiO2-Based Coatings in Indoor and Outdoor Environments—A Mechanistic View of the Processes at the Air/Catalyst Interface

Well-designed Submicron Rutile Pigment Heterophase Junction Photocatalyst Via Sol-Gel Method for Organic Pollutants Removal

Efficient visible light photocatalytic organic colorants elimination performance induced by biosynthesized titanium dioxide coupled cadmium sulfide nanostructures

Porphyrin-TiO2 Encapsulated ZIF-8/PAN-derived Porous Carbon Nanofiber Ternary Photocatalyst with Enhanced Photodegradation Efficiency Through Synergistic Effect

Photocatalytic Epoxy Paint Based on TiO2 for the Decontamination of Water under Visible LED and Sunlight Irradiation

Formaldehyde degradation of waterborne paints over S- and C-doped titanium dioxide under visible light

Fabrication of durable self-cleaning photocatalytic coating with long-term effective natural light photocatalytic degradation performance