Abstract:Photocatalytic degradation by the titanium dioxide (TiO2) photocatalyst attracts tremendous interest due to its promising strategy to eliminate pollutants from wastewater. The floating photocatalysts are explored as potential candidates for practical wastewater treatment applications that could overcome the drawbacks posed by the suspended TiO2 photocatalysis system. The problem occurs when the powdered TiO2 applied directly into the treated solution will form a slurry, making its reuse become a difficult step after treatment. In this study, the immobilization of titanium dioxide nanoparticles (TiO2 NPs) on the floating substrate (cork) employing polyvinyl alcohol (PVA) as a binder to anchor TiO2 NPs on the surface of the cork was carried out. Characterizations such as Fourier transformer infrared, X-ray diffraction (XRD), ultraviolet–visible spectroscopy (UV–vis), zeta potential, photoluminescence spectroscopy, femtosecond to millisecond time-resolved visible to mid-IR absorption spectroscopy, ion chromatography, and scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM–EDX) analyses were employed. XRD analysis revealed the formation of anatase-phase TiO2 NPs. The results demonstrated that the crystallite size was 9.36 nm. The band gap energy of TiO2 NPs was determined as 3.0 eV. PL analysis verified that TiO2 NPs possessed a slower recombination rate of electron–hole pairs as compared to anatase TiO2. The result was attributed by the behavior of photogenerated charge carriers on TiO2 NPs, which existed as shallowly trapped electrons that could survive longer than a few milliseconds in this study. Furthermore, SEM–EDX analysis indicated that TiO2 NPs were well distributed on the surface of the cork. At the optimal mole ratio of TiO2/PVA (1:8), the TiO2/PVA/cork floating photocatalyst degraded at 98.43% of methylene blue (MB) under a visible light source which performed better than under sunlight irradiation (77.09% of MB removal) for 120 min. Besides, the mineralization result has measured the presence of sulfate anions after photocatalytic activities, which achieved 86.13% (under a visible light source) and 65.34% (under sunlight). The superior photodegradation performance for MB was mainly controlled by the reactive oxygen species of the superoxide radical (•O2–). The degradation kinetics of MB followed the first-order kinetics. Meanwhile, the Langmuir isotherm model was fitted for the adsorption isotherm. The floating photocatalyst presented good reusability, resulting in 78.13% of MB removal efficiency even after five cycles. Our TiO2/PVA/cork floating photocatalyst fabrication and high photocatalytic performance are potentially used in wastewater treatment, especially under visible light irradiation.This article has not yet been cited by other publications.

Photocatalytic Epoxy Paint Based on TiO2 for the Decontamination of Water under Visible LED and Sunlight Irradiation

Photocatalytic Degradation of Organic Dyes by a High Efficient TiO<sub>2</sub>-Based Catalysts Under Solar Light Irradiation

Photocatalytic Degradation of Metoprolol by TiO2 Nanotube Arrays and UV-LED: Effects of Catalyst Properties, Operational Parameters, Commonly Present Water Constituents, and Photo-Induced Reactive Species

Photocatalyst-coated Carbon Microtube Electrodes: Preparation and Characterization of Their Properties and Photocatalytic Degradation of Methylene Blue.

Nanosized Titania-Nickel mixed oxide for visible light photocatalytic activity

Eco-Friendly TiO2 Nanoparticles: Harnessing Aloe Vera for Superior Photocatalytic Degradation of Methylene Blue

Synthesis of efficient light harvesting Cr, N Co-doped TiO2 nanoparticles for enhanced visible light photocatalytic degradation of xanthene dyes; eosin yellow and rose bengal

Synergistic Photocatalysis of Bayerite/Zeolite Loaded TiO2 Nanocomposites for Highly Efficient Degradation of Organic Pollutants in Aqueous Environments

Facile synthesis of TiO2-carbon composite doped nitrogen for efficient photodegradation of noxious methylene blue dye

Photocatalytic degradation of biological contaminant (E. coli) in drinking water under direct natural sunlight irradiation using incorporation of green synthesized TiO2, Fe2O3 nanoparticles

Improving the Photo Electro Catalytic Degradation of Methylene Blue by Modified TiO2/ITO Photo Anodes

Efficient photocatalytic degradation of aqueous organic pollutants by using an advanced TiO2/Ti3C2/montmorillonite composites

TiO2-x/Ag/rGO composites as effective photocatalysts for degradation of organic pollutants

Highly Efficient Visible-Light Photocatalysts: Bi2O3@TiO2 Derived from Ti-MOFs for Eriochrome Black T Degradation: A Joint Experimental and Computational Study

Magnetic TiO2/CoFe2O4 Photocatalysts for Degradation of Organic Dyes and Pharmaceuticals without Oxidants

Harnessing the synergistic potential of TiO2-CuSe composites for enhanced photocatalytic and antibacterial activities

Photocatalytic degradation of rhodamine B and methylene blue by electrochemically prepared nano titanium dioxide/reduced graphene oxide/poly (methyl methacrylate) nanocomposite

Effect of pH on photocatalytic degradation of Methylene Blue in water by facile hydrothermally grown TiO2 Nanoparticles under Natural Sunlight

Visible light active N-doped TiO2 immobilized on polystyrene as efficient system for wastewater treatment

Visible-light-driven CdSe quantum dots/graphene/TiO2 nanosheets composite with excellent photocatalytic activity for E. coli disinfection and organic pollutant degradation

Titanium Dioxide/Polyvinyl Alcohol/Cork Nanocomposite: A Floating Photocatalyst for the Degradation of Methylene Blue under Irradiation of a Visible Light Source