Abstract:In recent decades, numerous studies have indicated the substantial role semiconductors could play in photocatalytic processes for environmental applications. Materials that contain a semiconductor as a photocatalyst have a semi-permanent capacity for removing harmful gases from the ambient air. In this paper, the focus is on TiO2. Heterogeneous photocatalysis using TiO2 leads to the degradation of NO/NO2, benzene, toluene, and other priority air pollutants once in contact with the semiconductor surface. Preliminary evidence indicates that TiO2-containing construction materials and paints efficiently destroy the ozone precursors NO and NO2 by up to 80% and 30%, respectively. Therefore, the development of innovative coatings containing TiO2 as a photocatalyst was in the foreground of research activities. The aim of this was for coatings to be used as building and construction materials, mainly outdoors, e.g., on building façades on high-traffic roads for the degradation of priority air pollutants (NOx and volatile organic compounds) in the polluted urban atmosphere. Though there are advantages connected with the application of TiO2, due to its band gap of 3.2 eV, these are limited. TiO2 is effective only in the UV region (ca. 5%) of the solar spectrum with wavelengths λ < 380 nm. Hence, efforts are made here, as in many research studies, to dope TiO2 with transition metals to increase its activity using visible light, which will extend its application to indoor environments. In our studies, experiments were conducted with 0.1% (w/w) and 1% (w/w) Mn-TiO2 admixtures, and the ability of the modified photocatalysts to degrade NO by both solar and indoor illumination was evaluated. The surface chemistry at the air/catalyst interface, governed by the photoelectric characteristics of TiO2 and the formation of reactive oxygen species with co-occurring redox reactions, is reviewed in this paper. The factors affecting the application of TiO2 for the degradation of priority air pollutants as single compounds or mixtures are discussed. We investigated, particularly, the degradation of mixtures of priority compounds at typical concentrations in ambient air and confined spaces. This is a realistic approach, because pollutants are present as mixtures, rather than as individual compounds in ambient and indoor air. Moreover, organic polymers as paint constituents were found to be the primary source for carbonyl formation, e.g., formaldehyde, acetaldehyde, etc., during the heterogeneous photocatalytic processes conducted on TiO2-enriched coatings.

Removal of graffiti paint from construction materials coated with TiO2-based photocatalysts

Removal of graffiti paint from construction materials coated with TiO2-based photocatalysts

Synthesis of TiO2 Based Superhydrophobic Coatings for Efficient Anti-Corrosion and Self-Cleaning on Stone Building Surface

Self-cleaning durability assessment of TiO2/SiO2 photocatalysts coated concrete: Effect of indoor and outdoor conditions on the photocatalytic activity

Self-Cleaning and Charge Transport Properties of Foils Coated with Acrylic Paint Containing TiO2 Nanoparticles

Photo-Induced Degradation of Priority Air Pollutants on TiO2-Based Coatings in Indoor and Outdoor Environments—A Mechanistic View of the Processes at the Air/Catalyst Interface

Novel Effective Photocatalytic Self-Cleaning Coatings: TiO2-Polyfluoroalkoxy Coatings Prepared by Suspension Plasma Spraying

Effect of Plasma Treatment on Self-Cleaning Features of Acrylic Paint/TiO2-Coated Surfaces for Environmental Pollutant Removal

Photocatalytic Epoxy Paint Based on TiO2 for the Decontamination of Water under Visible LED and Sunlight Irradiation

In-situ Construction of TiO2/Ag Heterojunction Coating for Forming a Photocatalytic Self-cleaning Surface of Concrete

Detection of Reactive Oxygen Species (ROS) Generated by TiO2(R), TiO2(R/A) and TiO2(A) under Ultrasonic and Solar Light Irradiation and Application in Degradation of Organic Dyes.

Highly Stable Self-Cleaning Paints Based on Waste-Valorized PNC-Doped TiO 2 Nanoparticles

Preparation of photocatalytic TiO2-based self-cleaning coatings for painted surface without interlayer

Advanced Removal of Dyes with Tuning Carbon/TiO2 Composite Properties

Selective removal of over-paintings from "Street Art" using an environmentally friendly nanostructured fluid loaded in highly retentive hydrogels

Spray-Deposited TiO2 Layers on Aluminum Foil for Sustainable Water Remediation

Research status quo and review of TiO_2-based self-cleaning coatings

The effect of surfactant-free TiO2 surface hydroxyl groups on physicochemical, optical and self-cleaning properties of developed coatings on polycarbonate

Cyrene™, a Sustainable Solution for Graffiti Paint Removal

Assessing the potential of application of titanium dioxide for photocatalytic degradation of deposited soot on asphalt pavement surfaces

Fabrication of visible-light responsive TiO2@C photocatalyst with an ultra-thin carbon layer to efficiently degrade organic pollutants