Abstract:Elastomeric membranes are flexible and stretchable, commonly found in soft devices, soft robotics, and flexible electronics. The indentation of free-standing elastomeric membranes induces large transverse deflection, leading to the puncture of elastomeric membranes. In this paper, we study the indentation and puncture of elastomeric membranes by sphere-tipped indenters. Effects of the indenter tip size, indenter-membrane friction, and equi-biaxial pre-stretch of the membrane on the indentation depth-force curve, deformed membrane profile, puncture depth and force, and shape of the puncture site are studied both experimentally and theoretically. In the experiments, we observe an abnormal decrease of indentation force with increasing indentation depth, similar to the spontaneous expansion of a rubber balloon at a critical pressure. We call this phenomenon the snap-through instability in the indentation of elastomeric membranes. The profile of the lubricated membrane shrinks around the indenter tip with increasing indentation depth. The puncture depth and force of lubricated membranes are smaller than those of pristine membranes by several times. Indenters prefer to penetrate lubricated membranes by a line crack instead of a circular hole for pristine membranes. Our theoretical model successfully predicts the snap-through instability, puncture depth and force, and shrinkage of elastomeric membranes. Also, the shape of the membrane's puncture site is explained. These experimental findings and theoretical formulations reveal the new characteristics of the indentation and puncture of elastomeric membranes.

Indentation of circular hyperelastic membrane with hole by cylindrical indenter

Indentation of A Square Elastomeric Thin Film by A Flat-Ended Cylindrical Punch in the Presence of Long-Range Intersurface Forces

Axisymmetric Indentation of Curved Elastic Membranes by a Convex Rigid Indenter

Indentation on a transversely isotropic half-space of multiferroic composite medium with a circular contact region

Scaling Laws and Snap-Through Events in Indentation of Perforated Membranes

Indentation of Irreversibly Compressible Material: Computer Simulation

Indentation Of A Transversely Isotropic Thermoporoelastic Half-Space By A Rigid Circular Cylindrical Punch

Indentation of a Plate on a Thin Transversely Isotropic Elastic Layer

Mechanics of Indentation for Piezoelectric Thin Films on Elastic Substrate

Axisymmetric Indentations of an Elastic Half-Space with Tensed Surface/Membrane in the Johnson–Kendall–Roberts Adhesive Approximation

Surface Effects on Cylindrical Indentation of a Soft Layer on a Rigid Substrate

Numerical Analysis of Indentation of an Elastic Hemispherical Shell

Surface Effects on the Indentation of a Soft Layer on a Rigid Substrate with an Elliptical Cylinder Indenter

Nonlinear Indentation of Second-order Hyperelastic Materials

Puncture mechanics of soft elastomeric membrane with large deformation by rigid cylindrical indenter

Indentation of elastomeric membranes by sphere-tipped indenters: Snap-through instability, shrinkage, and puncture

Spherical Indentation of an Elastic Layer on a Rigid Substrate Revisited

Indentation of A Flat Circular Punch with Uniform Heat Flux at Its Base into Transversely Isotropic Magneto-Electro-Thermo-Elastic Half Space

Axisymmetric Indentation of Circular Rigid Plate on Layered Elastic Halfspace with Transverse Isotropy

Cylindrical Indentation of an Elastic Bonded Layer with Surface Tension

An Indentation Method to Determine the Constitutive Parameters of Hyperelastic Films under Large Deformation: Theoretical Model, Experiments and Simulations