Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. This article aims to analyze the tool vibration, surface roughness, and chip morphology in hard turning of hot work AISI H13 steel under multi-walled carbon nanotubes mixed nanofluid with minimum quantity lubrication. Recently developed new-generation nanocomposite AlTiSiN coating deposited on carbide insert via scalable pulsed power plasma (S3P) strategy is used as cutting tool material. The experiments associated with 30 number of trials are performed by considering various machining parameters that includes cutting speed, nose radius, depth of cut, and feed. In perspective of predictive modeling and multi-response optimization, response surface methodology has been engaged as a means to minimize the tool vibration and surface roughness. At last, with the measured tool life and based on the Gilbert's machining economic model, a distinctive cost analysis has been implemented to demonstrate the cost-effectiveness of coated carbide tool in hard turning. Statistical analysis confirms that nose radius with 36.65% has the highest contribution for surface roughness and cutting speed with 53.88% has the highest contribution for tool vibration. Increased flank wear and tool vibration are responsible for degradation of machined surface finish. Machining under nanofluid-MQL, chip morphology revealed the production of segmented type serrated saw-toothed chips. At higher cutting speed resulted: (a) obvious shape of saw tooth chip, (b) increase of distance among saw tooth, (c) reduction in chip segmentation frequency, (d) decrease of chip thickness. At optimum combination of process variables (v = 55 m/min, d = 0.2 mm, r = 1.2 mm, f = 0.07 mm/rev), the life of AlTiSiN coated carbide tool is found to be 42 min under nanofluid-MQL and estimated the total machining cost expenditure per finished part of Rs. 153.52. New-generation AlTiSiN coated carbide tools can be competently and productively utilized for machining of hot work tool steel under ecologically cognizant minimum quantity cooling-lubrication, is the most accepted in industrial applications.

Pressure-less sintering of molybdenum-reinforced ceramic cutting inserts with improved tool life

Influence of self-lubricating elements (SrSO4, Mo, and CaF2) on machining performance of Al2O3-ZrO2 (Y2O3)-NiCr-Ag cutting tool over a wide cutting speed range

Self-lubricating Behaviours of Ceramic Tools in Dry Cutting

Cutting Performance of Cemented-Carbides-Based Self-Lubricated Tool Embedded with Different Solid Lubricants

Design, Fabrication and Properties of a Self-Lubricated Tool in Dry Cutting

Controllable in situ fabrication of self-lubricating nanocomposite coating for light alloys

Assessment of self-lubricating coated cutting tools fabricated by laser additive manufacturing technology for friction-reduction

Comparative experimental study on application feasibiility of MTCVD TiCN-Al2O3-TiOCN multi-layer coated carbide and PVD TiN single layer coated composite ceramic inserts during dry machining of Ti-6Al-4V

Using Nano-Fluids Minimum Quantity Lubrication (NF-MQL) to Improve Tool Wear Characteristics for Efficient Machining of CFRP/Ti6Al4V Aeronautical Structural Composite

Lubrication Behavior of Y-TZP/Al2O3/Mo Nanocomposites at High Temperature

Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication

Influence of MoS2-Based Nanofluid Minimum Quantity Lubrication on Machining Performance of AISI 316L Stainless Steel

Study of Wear, Stress and Vibration Characteristics of Silicon Carbide Tool Inserts and Nano Multi-Layered Titanium Nitride-Coated Cutting Tool Inserts in Turning of SS304 Steels

Investigation on Surface Integrity in Hard Turning of AISI 4140 Steel with SPPP-AlTiSiN Coated Carbide Insert under Nano-MQL

Evolution of the surface quality and tool wear in the high speed turning of Al2219/n-B4C/MoS2 Nano metal matrix composites

Design, optimization, and verification of self‐lubricating ceramic tool microstructure by MC method

Micro Textured Cutting Inserts with Solid Lubrication as Alternative Coolant to Mineral Oil-Based Cutting Fluid in Turning Operation

Effect of Hbn/mos2 Hybrid Nanofluid Minimum Quantity Lubrication on the Cutting Performance of Self-Lubricating Ceramic Tools when Machining AISI 4340

A Critical Review of High-Temperature Tribology and Cutting Performance of Cermet and Ceramic Tool Materials

Novel Approach to the Fabrication of an Alumina-MoS2 Self-Lubricating Composite Via the in Situ Synthesis of Nanosized MoS2

Thermobarrier and antifriction properties of triboceramics on the surface of a cutting tool with (TiAlCrSiY)N/(TiAlCr)N coating during high-speed dry cutting