Abstract:For effective cutting tool inserts that absorb thermal shock at varying temperature gradients, improved thermal conductivity and toughness are required. In addition, parameters such as the coefficient of thermal expansion must be kept within a reasonable range. This work presents a novel material design framework based on a multi-scale modeling approach that proposes nickel (Ni)-reinforced alumina (Al 2 O 3 ) composites to tailor the mechanical and thermal properties required for ceramic cutting tools by considering numerous composite parameters. The representative volume elements (RVEs) are generated using the DREAM.3D software program and the output is imported into a commercial finite element software ABAQUS. The RVEs which contain multiple Ni particles with varying porosity and volume fractions are used to predict the effective thermal and mechanical properties using the computational homogenization methods under appropriate boundary conditions (BCs). The RVE framework is validated by the sintering of Al 2 O 3 -Ni composites in various compositions. The predicted numerical results agree well with the measured thermal and structural properties. The properties predicted by the numerical model are comparable with those obtained using the rules of mixtures and SwiftComp, as well as the Fast Fourier Transform (FFT) based computational homogenization method. The results show that the ABAQUS, SwiftComp and FFT results are fairly close to each other. The effects of porosity and Ni volume fraction on the mechanical and thermal properties are also investigated. It is observed that the mechanical properties and thermal conductivities decrease with the porosity, while the thermal expansion remains unaffected. The proposed integrated modeling and empirical approach could facilitate the development of unique Al 2 O 3 -metal composites with the desired thermal and mechanical properties for ceramic cutting inserts.

Design and Development of Hybrid Al2O3 Based Composites with Toughening and Self-Lubricating Second-Phase Inclusions

Fabrication and Characterisation of Alumina/aluminium Composite Materials with a Nacre-Like Micro-Layered Architecture

Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process

Balanced Mechanical and Tribological Performance of High-Frequency-Sintered Al-SiC Achieved via Innovative Milling Route—Experimental and Theoretical Study

A Novel Design to Produce High-Strength and High-Toughness Alumina Self-Lubricated Composites with Enhanced Thermal-Shock Resistance-Part I: Mechanical Properties and Thermal Shock Behavior of Al2o3/Mo-Al2o3 Laminated Composites

Micro-mechanical and tribological behavior of Al/SiC/B4C/CNT hybrid nanocomposite

Design And Preparation Of High-Performance Alumina Functional Graded Self-Lubricated Ceramic Composites

Development and characterization of multiwalled carbon nanotube-reinforced microwave sintered hybrid aluminum metal matrix composites: An experimental investigation on mechanical and tribological performances

Hybrid nanocomposites: A new route towards tougher alumina ceramics

Optimization of sintering profile to achieve highly toughened alumina based ceramic

High-Pressure synthesis of Al2O3-cBN-hBN Self-lubricating ceramic

Empirical investigation on controlled porosity level and dry sliding wear behavior of Al7075-(T6) doped with SiC+MoS2 based hybrid composites via advanced vacuum-assisted stir casting

PHYSICO-TRIBOLOGICAL ANND WEAR MECHANISM CHARACTERISTICS OF HYBRID REINFFORCED Al6063 MATRIX COMPOSITES

Strong and Tough 3D-(Sic-si3n4)/al Co-Continuous Composite with Enhanced Interfaces

Thermo-mechanical properties prediction of Ni-reinforced Al2O3 composites using micro-mechanics based representative volume elements

Development of Al-Mg2Si Alloy Hybrid Surface Composites by Friction Stir Processing: Mechanical, Wear, and Microstructure Evaluation

Synthesis, fabrication and tribo-mechanical studies of microcapsules filled and Al2O3/glass fibre reinforced UHMWPE based self-lubricating and self-healing composites

Fibrous Monolithic Ceramic with a Single Alumina Phase: Fracture and High‐temperature Tribological Behaviors

Fabrication of novel alumina composites reinforced by SiC nano-particles and multi-walled carbon nanotubes

Tribological Behavoiur of Silicon Carbide/ Rice Husk ash Reinforced Al7075 Hybrid Composites Using Optimization Techniques

Development & Fabrication of AL-3Mg Based SiC & Gr. Hybrid Metal Matrix Composite by Stir Casting Method