Experimental and Simulation Study on Ultra-Low NOx Emissions of Anthracite by Preheated Combustion
Shujun ZhuXiaoyu ZhangJianguo ZhuJicheng HuiYuhua LiuJiahang ZhangJiangong LinXiaoyang CaoQinggang Lyua State Key Laboratory of Coal Conversion,Institute of Engineering Thermophysics,Chinese Academy of Sciences,Beijing,Chinab School of Engineering Science,University of Chinese Academy of Sciences,Beijing,Chinac School of Energy Power and Mechanical Engineering,North China Electric Power University,Beijing,Chinad School of Coal Engineering,Shanxi Datong University,Datong,China
DOI: https://doi.org/10.1080/00102202.2024.2332612
IF: 1.9
2024-03-26
Combustion Science and Technology
Abstract:In this study, the ultra-low NO x emission of anthracite was achieved by the preheated combustion technology. Meanwhile, the preheated combustion model was established using Aspen Plus. High-temperature preheating (above 950°C) improved the conversion process from fuel-nitrogen to N 2 and precursor of NO x , which involved the cracking of N -5 and N -6. The conversion rate from fuel-nitrogen to N 2 was 81.88%. In addition, heterogeneous reduction reaction of NO x was the critical conversion path of fuel-nitrogen for the ultra-low NO x emission during the combustion. The conversion rate from NO x to N 2 was 0.43%. The average NO x emission of tail flue gas was 40.77 mg/m 3 and 46.15 mg/m 3 (@6%O 2 ) for Jincheng anthracite and Yangquan anthracite, respectively. The simulation results showed that the preheated combustion model demonstrated precise prediction capabilities for containing-nitrogen gas emission. The maximum error of NO x emission and N 2 concentration were 7.71% and 3.37%, respectively. The simulation and experimental results could be mutually verified.
energy & fuels,engineering, chemical,thermodynamics, multidisciplinary