Synergistic reduction on PM and NO source emissions during preheating-combustion of pulverized coal

Guangqing Zhu,Liang Xu,Shuai Wang,Fang Niu,Tian Li,Shi'en Hui,Yanqing Niu

DOI: https://doi.org/10.1016/j.fuel.2023.130699

IF: 7.4

2023-12-24

Fuel

Abstract:The present research focuses on the synergistic source control of particulate matter (PM) and NO x formation from pulverized coal combustion. Comparative experiments of preheating-combustion and conventional combustion were conducted in a lab-scale high-temperature preheating-combustion furnace, and PM 10 and NO were measured by an electrical low pressure impactor and a flue gas analyzer, respectively. The results of the experiment indicate that preheating-combustion has a significant reduction in PM 10 (especially PM 0.3 up to 37.51 %) and NO, which can achieve the synergistic control of PM 10 and NO source emissions during the combustion process. The fragmentation in preheating-combustion was weaker compared to the conventional combustion. Meanwhile, the relatively weak preheating-combustion coal char oxidation reaction leads to a decrease in ultrafine mode PM yielded due to the inhibition on vaporization of mineral inclusions. The PM 0.3 /PM 1 mass ratio of the preheating-combustion has a decreasing trend, implying an elevated yield of PM 0.3-1 and a shift of the average PM 1 particle size toward a larger particle size. Higher preheating temperature ( T p ) presented the potential to further reduce NO formation, and the NO reduction efficiency increased from 46.59 % to 56.60 % when the T p was increased from 1200 K to 1600 K. All our preliminary results throw light on the nature of synergistic source control of preheating-combustion PM and NO formation.

energy & fuels,engineering, chemical