Preheating Combustion Characteristics of Ultra-Low Volatile Carbon-Based Fuel

Shujun Zhu,Qinggang Lyu,Jianguo Zhu,Jiarong Li,Chengbo Man,Wen Liu

DOI: https://doi.org/10.1007/s11630-019-1101-0

IF: 2.013

2019-01-01

Journal of Thermal Science

Abstract:Pulverized coal combustion technology with preheating solid fuel in a circulating fluidized bed was used for the combustion test of ultra-low volatile carbon-based fuel. This paper first validated the feasibility and advantages of applying the combustion technology to this kind of fuel. The carbon-based fuel could achieve a stable preheating process in this test system. After the preheating, the apparent sensible heat of the fuel was significantly increased. This provided a necessary condition for the stable ignition and efficient combustion of the carbon-based fuel in the post-combustion chamber. The relative proportions of CO, H 2 , and CH 4 in preheated coal gas were very low, and the effect of high-temperature coal gas at the entrance of the post-combustion chamber was greatly impaired, indicating that the combustion process in post-combustion chamber was mainly the combustion of preheated char. At the same time, the strong reducing atmosphere in the circulating fluidized bed also facilitated the reduction of fuel-nitrogen into N 2 , which resulted in low NOx emissions. On this basis, with the combination of preheating combustion technology and air-staging combustion technology, the NOx emissions had drastically decreased when the burnout air distribution position moved down or varied from a single-layer distribution to a multi-layer distribution system. The lowest original NOx emissions were 90.6 mg/m 3 (at 6% O 2 ), and the combustion efficiency exceeded 97%, which ultimately achieved efficient and clean combustion of ultra-low volatile carbon-based fuel.