Experimental study on municipal sludge/coal co-combustion preheated by self-preheating burner: Self-preheating two-stage combustion and NO x emission characteristics

Kun Su,Ziqu Ouyang,Hongshuai Wang,Jinyang Zhang,Hongliang Ding,Wenyu Wang
DOI: https://doi.org/10.1016/j.energy.2023.130222
IF: 9
2024-01-05
Energy
Abstract:To achieve efficient and low-pollution sludge treatment, this study explored the first-time application of self-preheating combustion technology in sludge/coal co-combustion, and subsequently investigated the influences of sludge blending ratio ( BR ) and tertiary air types on self-preheating two-stage combustion and NO x emission characteristics in a 30 kW self-preheating combustion system with a novel two-stage down-fired combustor (DFC). This system was well adaptable for fuels, and still ran steadily even if BR was as high as 50 %. During preheating, properly increasing BR improved carbon microcrystalline structure of preheated carbon-based fuel and increased its specific surface area, but its carbon microcrystalline structure was gradually deteriorated at BR >20 %. Fuel properties of preheated coal gas were deteriorated with increasing BR . During combustion, combustion efficiency ( η ) increased first and then decreased with increasing BR , while NO x emission increased. For tertiary air nozzle located at top of burnout region, the structures of center symmetry and ring hedge had less effect on η and NO x emission, both of which remained at high levels, exceeding 98.5 % and 160 mg/m 3 . Notably, properly shifting injection position down reduced NO x emission significantly, albeit at the expense of reduction in η . Excessively low injection position had less effect on further NO x emissdddction.
energy & fuels,thermodynamics
What problem does this paper attempt to address?