Enhanced catalytic activities of MnOx/Co3O4 nanocomposites prepared via MOFs-templated approach for chlorobenzene oxidation

Ziying Hu,Jing Chen,Dongxu Yan,Yan Li,Hongpeng Jia,Can-Zhong Lu
DOI: https://doi.org/10.1016/j.apsusc.2021.149453
IF: 6.7
2021-06-01
Applied Surface Science
Abstract:Chlorinated volatile organic compounds (CVOCs) existing widely in the industries are harmful to the environment and human’s health. It is urgent to develop highly efficient catalysts for their combustion. Herein, a series of porous MnOx/Co3O4 nanocomposites are synthesized by the pyrolysis of Mn@Co-ZIF-67 precursors, in which the Mn ions are introduced by impregnation method. XRD, Raman, ICP-OES, BET, SEM, TEM, XPS, O2-TPD, and H2-TPR have been performed to investigate the as-prepared catalysts’ physicochemical properties. The optimal catalyst MnOx/Co3O4-4h exhibits 90% and 100% chlorobenzene (CB) conversion (1000 ppm, Air, WHSV = 60,000 mL/(g h)) at 334 °C and 350 °C, respectively. And the better catalytic performance over MnOx/Co3O4-4h compared with the pure Co3O4 and other MnOx/Co3O4 nanocomposites mainly ascribes to its porous structures, homogeneous dispersion, optimal Mn/Co molar ratio, more lattice defects, and higher surface OLatt/OAds ratio. Meanwhile, MnOx/Co3O4-4h displays high stability and resistance to moisture. Main intermediates have been further investigated by in situ DRIFT, and the degradation mechanism has been proposed according to the analysis of intermediates.
chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
What problem does this paper attempt to address?
The paper primarily focuses on addressing the environmental and human health hazards posed by chlorinated volatile organic compounds (CVOCs) prevalent in industry, by developing efficient catalysts for their catalytic oxidation. Specifically, the research team synthesized a series of MnO_x/Co_3O_4 nanocomposites using MOFs as a template, prepared by introducing Mn ions into the Co-ZIF-67 precursor. These materials feature a porous structure with MnO_x uniformly dispersed within Co_3O_4. The optimized catalyst MnO_x/Co_3O_4-4h achieved 90% and 100% chlorobenzene (CB) conversion rates at 334°C and 350°C, respectively (1000 ppm, air, WHSV = 60,000 mL/(g h)). This exceptional catalytic performance is mainly attributed to its porous structure, uniform dispersity, optimal Mn/Co molar ratio, more lattice defects, and a higher surface OLatt/OAds ratio. Additionally, MnO_x/Co_3O_4-4h also exhibited high stability and good water resistance. The main intermediates were analyzed by in situ DRIFT spectroscopy, and a degradation mechanism was proposed based on these findings. The paper begins by introducing the hazards of CVOCs as industrial pollutants, including their high toxicity, stability, and resistance to degradation, particularly the polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) produced by traditional thermal incineration methods at high temperatures, which pose a serious threat to the environment and human health. Subsequently, the paper discusses catalytic oxidation technology as an effective method for degrading CVOCs, which has attracted attention due to its lower operating temperatures, fewer organic by-products, high selectivity, low energy consumption, and economic advantages. Against this backdrop, the research team focused on developing efficient catalysts, especially transition metal oxides, because they are low-cost, have good anti-sintering properties, and exhibit good activity and stability, making them ideal substitutes for precious metal catalysts. The experimental section of the paper is described in detail, including the use of chemical reagents, catalyst preparation methods (such as the synthesis of Co-ZIF-67, preparation of Co_3O_4, synthesis of Mn@Co-ZIF-67, etc.), catalyst characterization techniques (such as XRD, SEM, TEM, Raman spectroscopy, XPS, O_2-TPD, and H_2-TPR), and methods for measuring catalytic activity. Finally, the results and discussion section provides a detailed analysis of the catalyst's structure, physical properties, elemental distribution, and surface chemical composition, as well as an evaluation of catalytic activity, demonstrating that MnO_x/Co_3O_4-4h has the best performance in the catalytic oxidation of chlorobenzene.