Abstract:Due to high volumetric energy density, the major market share of cathode materials for lithium-ion batteries is still dominated by LiCoO2 (LCO) at a 3C field. However, a number of challenges will be triggered if the charge voltage is increased from 4.2/4.3 to 4.6 V to further increase energy density, such as a violent interface reaction, Co dissolution, and release of lattice oxygen. Here, LCO is coated with the fast ionic conductor Li1.8Sc0.8Ti1.2(PO4)3 (LSTP) to form LCO@LSTP, while a stable interface of LCO is in situ constructed by the decomposition of LSTP at the LSTP/LCO interface. As decomposition products of LSTP, Ti and Sc elements can be doped into LCO and thus reconstruct the interface from a layered structure to a spinel structure, which improves the stability of the interface. Moreover, Li3PO4 from the decomposition of LSTP and remaining LSTP coating as a fast ionic conductor can improve Li+ transport when compared with bare LCO, and thus boost the specific capacity to 185.3 mAh g-1 at 1C. Benefited from the stable interface and fast ion conducting coating, the LCO@LSTP (1 wt %) cathode delivers a high capacity of 202.3 mAh g-1 at the first cycle (0.5C, 3.0-4.6 V), and shows a higher capacity retention of 89.0% than LCO (50.9%) after 100 cycles. Furthermore, the change of the Fermi level obtained by using a kelvin probe force microscope (KPFM) and the oxygen band structure calculated by using density functional theory further illustrate that LSTP supports the performance of LCO. We anticipate that this study can improve the conversion efficiency of energy-storage devices.

Discharge Rate Capability of the LiCoO2 Electrode

High-voltage Performance of LiCoO2 Cathode Studied by Single Particle Microelectrodes –influence of Surface Modification with TiO2

High‐Capacity and High‐Rate Discharging of a Coenzyme Q10‐Catalyzed Li–O2 Battery

Promoting Surface Electric Conductivity for High-Rate LiCoO<sub>2</sub>

Lattice Engineering on Li 2 CO 3 ‐Based Sacrificial Cathode Prelithiation Agent for Improving the Energy Density of Li‐Ion Battery Full‐Cell

Promoting power density by cleaving LiCoO2 into nano-flake structure for high performance supercapacitor

Extending The High-Voltage Capacity Of Licoo2 Cathode By Direct Coating Of The Composite Electrode With Li2co3 Via Magnetron Sputtering

LiCoO 2 electrode/electrolyte interface of Li-ion batteries investigated by electrochemical impedance spectroscopy

Structure and electrochemical performance of LiCoO 2 cathode material in different voltage ranges

Enhanced Interfacial Kinetics and High Rate Performance of LiCoO2 Thin-Film Electrodes by Al Doping and in Situ Al2O3 Coating.

LiCoO2 Electrode/electrolyte Interface of Li-ion Batteries Investigated by Electrochemical Impedance Spectroscopy

Controlled Growth of Li2o2 by Cocatalysis of Mobile Pd and Co3o4 Nanowire Arrays for High-Performance Li-O-2 Batteries

Weakened Solvation Structure Electrolytes Enable High-Voltage Graphite||LiCoO2 Batteries

Lattice Engineering on Li2CO3-Based Sacrificial Cathode Prelithiation Agent for Improving the Energy Density of Li-Ion Battery Full-Cell

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

Electrochemical Behavior of LiCoO2 in a Saturated Aqueous Li2SO4 Solution

Channelization of cathode/electrolyte interphase to enhance the rate-capability of LiCoO2

Electrospinning Synthesis of Wire-Structured Licoo2 for Electrode Materials of High-Power Li-Ion Batteries

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

In Situ-Constructed Multifunctional Interface for High-Voltage 4.6 V LiCoO2

Li migration, nucleation and growth behavior regulated by a lithiophilic cobalt phosphide-doped carbon nanofibers derived ion/electron conductive framework