Abstract:Tanks and silos are often designed as ring-stiffened cylindrical shells. Nowadays, the load-increasing effect of closely spaced ring stiffeners under axial compression has received limited attention in research and practice. Considering the structural safety, the ring-stiffened shell needs to be estimated on the conservative side in practice. This is not desirable in terms of modern lightweight steel structures. However, material efficiency is achieved by combining thin plates with ring-stiffeners. In this paper, small specimen experimental series are carried out to calibrate numerical models, which are subsequently used in parameter studies, because the large-scale experiments are cost-intensive and therefore difficult to carry out in the laboratory. The small cylindrical shells are manufactured by welding of two half-cylindrical shells and the ring stiffeners are spot-welded to the cylindrical shell. Geometric dimension of shell specimens is measured by 3D scanning technology. The measured geometric imperfection information is directly imported into the numerical model based on a mapping relationship and the buckling tests are recalculated by means of geometrically and materially nonlinear analysis with imperfection. The results indicate that the buckling resistance calculated by the Finite Element analysis is very close to that of the test results. The initial geometric imperfection is discussed with reference to the Eurocodes design standard. Furthermore, influence of the ring-stiffener parameter, including imperfection amplitude, radius over thickness ratio, geometry of ring stiffener etc., on the buckling load and knockdown factor is discussed based on a large number of parameter study.

Pressure Buckling of Ring Encased in Cavity

Buckling behaviour of imperfect ring-stiffened cone–cylinder intersections under internal pressure

Elastic Buckling of Functionally Graded Rings Under Hydrostatic Pressure

On the response of postbuckling of rings with strain hardening under external pressure

Effects of Ringed Stiffener on the Buckling Behavior of Cylindrical Shells with Cutout under Axial Compression: Experimental and Numerical Investigation

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Dynamic behavior of circular ring impinging on ideal elastic wall: Analytical model and experimental validation

Effect of small length scale on elastic buckling of multi-walled carbon nanotubes under radial pressure

On Instability Failure of Corroded Rings under External Hydrostatic Pressure

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Buckling of ring-stiffened cylindrical shell under axial compression: Experiment and numerical simulation

Circumferential buckling of steel liners for the containment in NPPs

ELASTIC BUCKLING OF ELLIPTICAL CYLINDRICAL SHELLS UNDER EXTERNAL PRESSURE

Buckling and material failure analyses for ring-stiffened composite shells subjected to hydrostatic pressure

Thermal buckling analysis of a point-anchored circular ring surrounded by a concrete cylinder

Dynamic Buckling of Cylindrical Shells with Arbitrary Axisymmetric Thickness Variation under Time Dependent External Pressure

Buckling Behavior of Large-Scale Thin-Walled Ellipsoidal Head under Internal Pressure

Buckling of Cylindrical Shells with Measured Settlement under Axial Compression

Experimental and numerical buckling analysis of carbon fiber composite cylindrical shells under external pressure

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity