Abstract:A series of nonlinear characteristics, such as strain softening, elastic–plastic coupling, and plastic deformation failure, have focused attention on postpeak deep rock masses. However, one-dimensional models, such as the Mohr–Coulomb (M–C) and strain-softening (SS) models, do not consider the influence of confining pressure, which can increase inaccuracies when used for simulating rock deformation in deep underground engineering. In this study, the composite effect of plastic damage accumulation on the mechanical properties of surrounding rock under different confining pressures was investigated through triaxial cyclic loading–unloading tests. A two-dimensional mechanical model for the cohesion, friction angle, elastic modulus, and dilatancy angle was developed by considering the combined effect of the confining pressure and plastic shear strain. The results showed that the cohesion and friction angle could be determined using an exponential function and a line function, respectively, with plastic deformation and confining pressure. The correlation coefficient of the two-dimensional function reached 95%. The elastic modulus increased with the confining pressure as a negative exponential function but decreased with the plastic deformation as a linear function. The dilation angle linearly decreased with the confining pressure and first increased and then decreased with the plastic deformation, which could be determined by the difference between two exponential functions. Through the use of FLAC3D software, the strain-softening model developed in this study was used to simulate a triaxial rock compression test, and the result demonstrated that the modified model was accurate and reasonable.

On the response of postbuckling of rings with strain hardening under external pressure

Elastic Buckling of Functionally Graded Rings Under Hydrostatic Pressure

Buckling behaviour of imperfect ring-stiffened cone–cylinder intersections under internal pressure

On Instability Failure of Corroded Rings under External Hydrostatic Pressure

Analytical Analysis of the Longitudinal Response of Shield Tunnel Lining Considering Ring-to-ring Interaction

Theoretical Insight of Strengthening and Hardening Behavior in Ultrafine-Grained Metals under High Pressure

On Elastic-Plastic Collapse of Subsea Pipelines under External Hydrostatic Pressure and Denting Force

A Simply Analytic Study of Buckled Thin Films on Compliant Substrates

Buckling and material failure analyses for ring-stiffened composite shells subjected to hydrostatic pressure

Expansion of Spherical Cavity of Strain-Softening Materials with Different Elastic Moduli of Tension and Compression

Buckling Response of Offshore Pipelines under Combined Tension, Bending, and External Pressure

Counter-intuitive Breathing Mode Response of an Elastic–plastic Circular Ring Subjected to Axisymmetric Internal Pressure Pulse

Effect Of Confining Pressure On Stress Intensity Factors For Cracked Brazilian Disk

EXPERIMENTAL STUDY OF THE BEARING CAPACITY OF INTERNAL|EXTERNAL FLANGE JOINTS SUBJECTED TO PRESSURE AND BENDING LOADINGS WITH VARIOUS ECCENTRICITIES

Strain Response and Buckling Behavior of Composite Cylindrical Shells Subjected to External Pressure with One End Fixed and the Other under Free Boundary Conditions

Finite Deformation Mechanics In Buckled Thin Films On Compliant Supports

Pressure Buckling of Ring Encased in Cavity

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Effects of Ringed Stiffener on the Buckling Behavior of Cylindrical Shells with Cutout under Axial Compression: Experimental and Numerical Investigation

Postbuckling Analysis and Its Application to Stretchable Electronics

An experimental investigation and mechanical modeling of the combined action of confining stress and plastic strain in a rock mass