Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. Microchannel-based cooling methods have been found extremely suitable for compact heat exchangers. High rate of heat extraction is always associated with pressure drop penalty which lowers the overall performance of the device. Heat sinks that would deliver high thermal performance at relatively lower pumping are highly desirable. In the present article, curved microchannels with secondary flow channels are numerically investigated to minimize the pressure loss and enhance the heat transfer simultaneously. Uniform heat flux boundary condition with Reynolds number ranging from 100 to 225 is considered for analysis. Seven models having secondary flow channel orientation angles varying from 30° to 42° are compared with radially curved microchannel (RCMC) having central inlet and horizontal radial outlet arrangement. A greater increase in Nu is observed in the secondary channel with a higher orientation angle, primarily attributed to enhanced fluid mixing. Results revealed a maximum Nusselt number increase of 25.72% for RCMC with secondary flow (RCMCSF) when compared to RCMC with reduction in pressure drop penalty at the same time. At a Reynolds number of 100, the RCMCSF 30D demonstrated the maximum pressure loss reduction, which amounted to 23.91% compared to RCMC. The temperature of the wall in contact with the fluid exhibits a decreasing trend with an increase in Reynolds number (Re). This occurrence is attributed to improved fluid mixing, resulting from higher flow rates. The intensified velocity vectors in the cross-plane contribute to this enhanced mixing and subsequent decline in wall temperature. Reduction in average wall temperature up to 3.43°C is noted for RCMCSF when compared to RCMC. Of all the designs considered, radial curved microchannel with a secondary channel orientation angle of 40° shows enhanced thermal hydraulic performance with performance factor equal to 1.31.

Secondary vortex drag reduction and heat transfer enhancement of nanofluids in hierarchical microchannels applied to thermal management of electronic components

Nanofluids in microchannel heat sinks for efficient flow cooling of power electronic devices

Review on Coupled Thermo-Hydraulic Performance of Nanofluids and Microchannels

Study on the flow and heat transfer performance of nanofluid in a novel manifold microchannel heat sink combining trapezoidal cross-section and curved corners

Numerical Study of Enhanced Heat Transfer of MicroChannel Heat Sink with Nanofluids

Numerical analysis on thermal-hydraulic performance of optimized microchannel heat sink with slant ribs and quatrefoil rib-elliptical groove complex structures

Numerical simulation of convective heat transfer behavior of nanofluids in elliptical microchannels

Thermal performance improvement in water nanofluid/GNP–SDBS in novel design of double-layer microchannel heat sink with sinusoidal cavities and rectangular ribs

Numerical study of different micro-channel structures on fluid flow and heat transfer performance

Numerical study on hydrothermal performance in a microchannel with gradient array of ribs and pin fins

Investigation on thermal performance of nanofluids in a microchannel with fan-shaped cavities and oval pin fins

Numerical investigation of thermal performance augmentation of nanofluid flow in microchannel heat sinks by using of novel nozzle structure: sinusoidal cavities and rectangular ribs

On the assessment of the thermal performance of microchannel heat sink with nanofluid

Heat transfer and pressure drop analysis of a microchannel heat sink using nanofluids for energy applications

Numerical Study on Hybrid Discontinuous Microchannel Heat Sink Combining Manifold with Pin Fins (DMC-MPF) for High Power Electronic Device

Thermohydraulic performance of convergent and rectangular microchannels with rectangular grooves using silver nanofluid: numerical study

Numerical Investigations of the Thermal-Hydraulic Characteristics of Microchannel Heat Sinks Inspired by Leaf Veins

Flow thermohydraulic characterization of hierarchical-manifold microchannel heat sink with uniform flow distribution

Enhancement in thermo hydraulic performance of radially curved microchannel with secondary flow

Numerical Investigation of Fluid Flow and Heat Transfer in High-Temperature Wavy Microchannels with Different Shaped Fins Cooled by Liquid Metal

Hydrothermal, entropy generation and exergy performances analysis in a mini-channel with combination of longitudinal and transverse vortex generators using Al2O3 nanofluids