Thermohydraulic performance of convergent and rectangular microchannels with rectangular grooves using silver nanofluid: numerical study

Nehad Abid Allah Hamza,Isam Mejbel Abed,Nejla Mahjoub Said

DOI: https://doi.org/10.1007/s10973-024-13209-1

IF: 4.755

2024-05-18

Journal of Thermal Analysis and Calorimetry

Abstract:This study focuses on enhancing the performance of microchannel heat sinks (MCHSs) through the incorporation of longitudinal rectangular-sided grooves in conjunction with standard designs such as rectangular microchannels and converging microchannels. The aim is to improve hydrothermal properties, including fluid flow and the reduction in the pressure drop. The study explores the augmented heat transfer achieved by employing a higher-thermal-conductivity fluid along with the use of these grooves to disrupt the thermal boundary layer and induce secondary flow. Utilizing a 3D numerical model based on the finite element approach, investigations are conducted on a copper heat sink with slight variations in both hydraulic diameter and conjugated heated area. Silver/water nanofluid with different volume fraction values (0, 0.025, 0.05 and 0.075) is employed. Comparative analysis of pressure drops among conventional MCHS and other designs, namely rectangular with side rectangular grooves, converge (CMCHS) and converge with side rectangular grooves (CMCHS-WSRG) microchannel heat sinks, reveals that an increase in nanofluid volume concentration results in elevated pressure drop across all models. The design of RMCH and CMCHS without side rectangular grooves is shown to decrease the fluid flow pressure drop by 12.5 and 33.35%, respectively. Additionally, the study indicates that the average temperature of the heat sink base in CMCHS-WSRG is lower than in other designs. A comparison of the hydrothermal performance factor of the three models with the standard MCHS demonstrates that RMWSR grooves exhibit higher hydrothermal performance due to their larger conjugated heated area. The use of CMCHS-WSRG generates a higher velocity distribution compared to other designs. In conclusion, the incorporation of longitudinal rectangular grooves is found to enhance the hydrothermal performance of MCHS.

chemistry, physical, analytical,thermodynamics