Abstract:Solid-oxide electrolyzer cells (SOECs) based on yttria-stabilized zirconia (YSZ) oxide electrolytes are devices capable of producing hydrogen with excess thermal energy. However, beginning with initial materials sintering and extending through electrochemical aging, Sr diffusion within the Gd-doped CeO2 (GDC) barrier layer has been observed to lead to the formation of unwanted secondary phases such as SrO and SrZrO3. To establish the impact of these phases on SOEC performance, we perform firstprinciples calculations to determine secondary phase bulk oxide conductivities and compared them to that of the YSZ electrolyte. We find that SrO has a low conductivity arising from poor mobility and a low concentration of oxygen vacancies (V_O^2+), and its presence in SOECs should therefore be avoided as much as possible. SrZrO3 also has a lower oxide conductivity than YSZ; however, this discrepancy is primarily due to lower V_O^2+ concentrations, not V_O^2+ mobility. We find Y-doping to be a viable strategy to increase V_O^2+ concentrations in SrZrO3, with 16% substitution of Y on the Zr site leading to an ionic conductivity on par with that of YSZ. Energy dispersive x-ray spectroscopy obtained using scanning transmission electron microscropy on cross-sections of SOECs indicates that Y is the most common minority element present in SrZrO3 forming near the GDC—YSZ interface. Thus, we expect SrZrO3 to be rich in V_O^2+ and not to hinder long-term device performance. These results from our combined computational–experimental analysis can inform future materials engineering strategies designed to limit the detrimental effects of Sr-induced secondary phase formation on SOEC performance.

Understanding the phase stability of yttria stabilized zirconia electrolyte under solid oxide electrolysis cell operation conditions

STABILITY OF SUB-MICRON SIZED CRYSTAL STRUCTURE YTTRIA STABILIZED ZIRCONIA ELECTROLYTE

Preparation and Electrical Properties Test of Yttria Stabilized Zirconia

Chemical and Structural Origin of Hole States in Yttria-Stabilized Zirconia

Fabrication of nanoscale yttria stabilized zirconia for solid oxide fuel cell

Destabilization of cubic-stabilized zirconia electrolyte induced by boron oxide under reducing atmosphere

Yttria-stabilized zirconia (8YSZ) synthesis in a supercritical CO 2 -assisted process: a parametric study for achieving cubic phase stability

Phase Stability of Perovskite Oxide Electrodes under Operating Condition in Solid Oxide Fuel Cell

Solid electrolytes based on zirconium dioxide partially stabilized with oxides of yttrium, gadolinium, and samarium

Influence of Y2O3 Doping on Phase Evolution and Dielectric Characteristics of ZrO2 Ceramics

Study on the Properties of Ysz Electrolyte Made by Plaster Casting Method and the Applications in Solid Oxide Fuel Cells

Theoretical Study on the Influence of the Anharmonic Effect on the Ionic Conductivity and Thermal Stability of 8 mol% Yttria-Stabilized Zirconia Solid Electrolyte Material

Ionic Conductivity of Electrolytes Composed of Oleate-Capped Yttria-Stabilized Zirconia Nanoparticles

Nanocrystal Engineering of Thin-Film Yttria-Stabilized Zirconia Electrolytes for Low-Temperature Solid-Oxide Fuel Cells

Fabrication, Microstructure and Properties of A Ysz Electrolyte for Sofcs

Theoretical consideration of Solid Oxide Electrolyzer Cell with zirconia-based electrolyte operated under extreme polarization or with low supply of feedstock chemicals

Structural and compositional characterization of yttria-stabilized zirconia: evidence of surface-stabilized, low-valence metal species

Research on Sintering Process of YSZ Electrolyte

Electrochemical Stability of Sm0.5sr0.5coo3-Delta-Infiltrated Ysz for Solid Oxide Fuel Cells/Electrolysis Cells

Surface modification of yttria-stabilized zirconia electrolyte by atomic layer deposition

Impact of Sr-Containing Secondary Phases on Oxide Conductivity in Solid-Oxide Electrolyzer Cells