Abstract:Chemical-looping combustion (CLC) is a promising technology which can realize CO2 capture with low energy consumption. Carbon deposition is one of the main challenges in CLC of methane, which decreases the efficiency of combustion and CO2 capture. In this work, the carbon formation behaviors of four typical oxygen carriers (OCs) including NiO/ZrO2, Fe2O3/Al2O3, MnO2/ZrO2 and CuO/SiO2 were investigated, and a strategy for carbon elimination was proposed by arranging the four OCs with suitable sequences in fixed-bed reactor. It is found that carbon is easy to form on the NiO/ZrO2 OC, although it shows high CH4 conversion. The reduction of Fe2O3/Al2O3 is a stepwise process and carbon will be generated in the deep reduction from Fe3O4 to FeO/Fe. MnO2/ZrO2 OC exhibits poor activity for CH4 conversion, but it shows high resistance to carbon deposition. For CuO/SiO2 OC, it shows high CH4 conversion (89.1%) and CO2 selectivity (97.6%) with almost no formation of carbon. When combing the four OCs in the CuNiFeMn sequence, high-performance CuO/SiO2 and NiO/ZrO2 OCs in front of the filling fixed-bed can oxidize most of CH4. CuO/SiO2 OC will oxidize CH4 to CO2 and H2O, then the formed CO2/H2O may gasify the carbon deposition on the NiO/ZrO2 OC to produce CO and H2. Thereafter, these reducible gases as well as the residual CH4 can be oxidized by the following Fe2O3/Al2O3 and MnO2/ZrO2 OCs with relatively poor activity. In this way, the synergistic effect among the sequenced OC mixtures can significantly enhance the CLC efficiency and resistance to carbon deposition.

Characterization of NO x Release during Combustion Synthesis and Cyclic Reaction Performance of Cu-Based Oxygen Carriers Prepared with Citric Acid

Green sucrose-sol-gel combustion synthesis of a CuO-based oxygen carrier for NO x emission reduction and its cyclic reaction performance

Preferential Oxidation of CO in H2-rich Gas Via Chemical Looping Combustion with Ce-doped CuO Oxygen Carriers

Oxidation of Ammonia over a Copper Oxide-Containing Solid Oxygen Carrier with Oxygen Uncoupling Capability

Synergetic effects of mixed copper–iron oxides oxygen carriers in chemical looping combustion

Preferential oxidation of CO in H 2 -rich gas via chemical looping combustion with Ce-doped CuO oxygen carriers

Numerical Investigation of Nickel–Copper Oxygen Carriers in Chemical-Looping Combustion Process with Zero Emission of CO and H2

Quantitative Evaluation of Four Oxygen Carriers for Natural Gas Chemical Looping Combustion

Transformation and Migrant Mechanism of Sulfur and Nitrogen during Chemical Looping Combustion with CuFe2O4

Preparation of composite nickel–iron oxide as highly reactive oxygen carrier for chemical-looping combustion process

Enhanced performance of chemical looping combustion of methane by combining oxygen carriers via optimizing the stacking sequences

Recent Advances of Cu-Based Catalysts for NO Reduction by CO under O2-Containing Conditions

Experiment research on cyclic stability of oxygen capacity for copper-based oxygen carrier

The effect of copper-doped SBA-15 on catalytic oxidation of NO

Spatial evolution characteristics of active components of copper-iron based oxygen carrier in chemical looping combustion

NiO/κ-CeZrO4 functional oxygen carriers with Niδ+ and oxygen vacancy synergy for chemical looping partial oxidation reforming of methane

Cu-Modified Manganese Ore As an Oxygen Carrier for Chemical Looping Combustion

Chemical-Looping Combustion with Iron-Based Oxygen Carries

Enhanced resistance to carbon deposition in chemical-looping combustion of methane: Synergistic effect of different oxygen carriers via sequence filling

The reduction of copper in LaFeO3, La2CuO4 and CuO three-phase system improves the efficiency of NO removal: Experimental and density functional theory calculation

Investigation of CuO–Fe 2 O 3 Oxygen Carriers with Different Supports in Chemical Looping Combustion