Abstract:Chemical-looping combustion (CLC) is a novel and promising option for several applications including carbon capture (CC), fuel reforming, H-2 generation, etc. Previous studies demonstrated the feasibility of performing CLC in a novel rotary design with micro-channel structures. Part 1 of this series studied the fundamentals of the reactor design and proposed a comprehensive design procedure, enabling a systematic methodology of designing and evaluating the rotary CLC reactor with different OCs and operating conditions. This paper presents the application of the methodology to the designs with three commonly used OCs, i.e., copper, nickel, and iron. The physical properties and the reactivities of the three OCs are compared at operating conditions suitable for the rotary CLC. Nickel has the highest reduction rate, but relatively slow oxidation reactivity while the iron reduction rate is most sensitive to the fuel concentration. The design parameters and the operating conditions for the three OCs are selected, following the strategies proposed in Part 1, and the performances are evaluated using a one-dimensional plug-flow model developed previously. The simulations show that for all OCs, complete fuel conversion and high carbon separation efficiency can be achieved at periodic stationary state with reasonable operational stabilities. The nickel-based design includes the smallest dimensions because of its fast reduction rate. The operation of nickel case is mainly limited to the slow oxidation rate, and hence a relatively large share of air sector is used. The iron-based design has the largest size, due to its slow reduction reactivity near the exit or in the fuel purge sector where the fuel concentration is low. The gas flow temperature increases monotonically for all the cases, and is mainly determined by the solid temperature. In the periodic state, the local temperature variation is within 40 K and the thermal distortion is limited. The design of the rotary CLC is also scaled to different pressures and inlet temperatures. The method of scaling is discussed and desirable operational performances are obtained. (C) 2013 Elsevier Ltd. All rights reserved.

Numerical Investigation of Nickel–Copper Oxygen Carriers in Chemical-Looping Combustion Process with Zero Emission of CO and H2

An Improved Form of Shrinking Core Model for Prediction of the Conversion During Reduction Process in Chemical Looping Combustion

Preparation of composite nickel–iron oxide as highly reactive oxygen carrier for chemical-looping combustion process

Experiments on chemical looping combustion of coal with a NiO based oxygen carrier

Synergetic effects of mixed copper–iron oxides oxygen carriers in chemical looping combustion

Interaction Between Fe-based Oxygen Carriers and N-Heptane During Chemical Looping Combustion

Low-Temperature Chemical Looping Combustion for Removing Unburnt Gaseous Components with A Cement-Supported Cuo Oxygen Carrier

Quantitative Evaluation of Four Oxygen Carriers for Natural Gas Chemical Looping Combustion

Theoretical Study of the Reactive Mechanisms of Li-Doped Ni-Based Oxygen Carrier during Chemical Looping Combustion

Numerical Simulation of a 10 kW Gas-Fueled Chemical Looping Combustion Unit

Enhanced resistance to carbon deposition in chemical-looping combustion of methane: Synergistic effect of different oxygen carriers via sequence filling

Design of a Rotary Reactor for Chemical-Looping Combustion. Part 2: Comparison of Copper-, Nickel-, and Iron-Based Oxygen Carriers

Transformation and Migrant Mechanism of Sulfur and Nitrogen during Chemical Looping Combustion with CuFe2O4

Performance and Kinetics of Iron-Based Oxygen Carriers Reduced by Carbon Monoxide for Chemical Looping Combustion

Unraveling the Structure–Reactivity Relationship of CuFe2O4 Oxygen Carriers for Chemical Looping Combustion: A DFT Study

Three-dimensional Simulation of a Gas-Fueled Chemical Looping Combustion System with Dual Circulating Fluidized Bed Reactors

Numerical simulation of a chemical looping combustion of biomass: Hydrodynamic investigation

Development of Sinter-Resistant Core–Shell LaMnxFe1–xO3@mSiO2 Oxygen Carriers for Chemical Looping Combustion

Evaluation of Fe-Ni Composite Oxygen Carrier in Coal Chemical Looping Gasification

Numerical Investigation of a Syngas-Fueled Chemical Looping Combustion System

Numerical Investigation of Solid-Fueled Chemical Looping Combustion Process Utilizing Char for Carbon Capture