Abstract:We present a ceramic material based on hematite (Fe$_2$O$_3$) and zirconia stabilized with yttria at 8% molar (YSZ), that exhibits stable electrical properties with transported charge and that can be tuned to the resistivities necessary to induce spark-quenching in gaseous detectors ($\rho = 10^9-10^{12}$ $\Omega \cdot$cm), from room temperature down to the liquid-vapor coexistence point of nitrogen (77 K). It, thus, allows covering the operating temperatures of most immediate interest to gaseous instrumentation. The ceramics have been produced in a region of mass concentrations far from what has been usually explored in literature: optimal characteristics are achieved for Fe$_2$O$_3$ concentrations of 75%wt (LAr boiling temperature), 35%wt (LXe boiling temperature), and 100%wt (room temperature). The nine order of magnitude enhancement observed for the electrical conductivity of the mixed phases relative to that of pure Fe$_2$O$_3$ is startling, however it can be qualitatively understood based on existing literature. Plates of 4 cm x 4 cm have been manufactured and, prior to this work, operated in-detector at the LXe boiling point (165 K), demonstrating spark-free operation. Preliminary results obtained for the first time on a spark-protected amplification structure (RP-WELL) at around the LAr boiling point (90 K) are now presented, too.

Cryogenic RPWELL: a novel charge-readout element for dual-phase argon TPCs

Cryogenic RPWELL: a novel charge-readout element for dual-phase argon TPCs

The cryogenic RWELL: a stable charge multiplier for dual-phase liquid-argon detectors

Novel resistive charge-multipliers for dual-phase LAr-TPCs: towards stable operation at higher gains

Discharge quenching mechanism and performance of RPWELL with tunable 3D printed resistive plates, charge evacuation in semiconductive glass RPWELL and discharge quenching for Cryogenic-RWELL over a wide range of resistivity

First studies with the Resistive-Plate WELL gaseous multiplier

Laboratory studies of THGEM-based WELL structures with resistive anodes

Towards a large-area RPWELL detector: design optimization and performance

Cryogenic THGEM–GPM for the Readout of Scintillation Light from Liquid Argon

Development of Fe$_2$O$_3$/YSZ ceramic plates for cryogenic operation of resistive-protected gaseous detectors

Development and characterization of a slow wavelength shifting coating for background rejection in liquid argon detectors

Advances towards a large-area, ultra-low-gas-consumption RPC detector

Cryogenic setup for the characterization of wavelength-shifting materials for noble element radiation detectors

The μ-RWELL in High Energy Physics and beyond

Restoring chiral symmetry to O(a^2) for dynamical Wilson fermions

Progress in Developing Hybrid RPCs: GEM-like Detectors with Resistive Electrodes

Toward Application of a Thick Gas Electron Multiplier (THGEM) Readout for a Dark Matter Detector

Characterisation of resistive MPGDs with 2D readout

Eco-friendly Resistive Plate Chambers for detectors in future HEP applications