Abstract:We report on the successful operation of a double phase Liquid Argon Large Electron Multiplier Time Projection Chamber (LAr LEM-TPC) equipped with two dimensional projective anodes with dimensions 10$\times$10 cm$^2$, and with a maximum drift length of 21 cm. The anodes were manufactured for the first time from a single multilayer printed circuit board (PCB). Various layouts of the readout views have been tested and optimised. In addition, the ionisation charge was efficiently extracted from the liquid to the gas phase with a single grid instead of two previously. We studied the response and the gain of the detector to cosmic muon tracks. To study long-term stability over several weeks, we continuously operated the chamber at fixed electric field settings. We reproducibly observe that after an initial decrease with a characteristic time of $\tau\approx 1.6$ days, the observed gain is stable. In 46 days of operation, a total of 14.6 million triggers have been collected at a stable effective gain of $G_\infty\sim 15$ corresponding to a signal-to-noise ratio $(S/N)\gtrsim 60$ for minimum ionising tracks. During the full period, eight discharges across the LEM were observed. A maximum effective gain of 90 was also observed, corresponding to a signal-to-noise ratio $(S/N)\gtrsim 400$ for minimum ionising tracks, or $S/N\approx10$ for an energy deposition of 15 keV on a single readout channel.

The cryogenic RWELL: a stable charge multiplier for dual-phase liquid-argon detectors

Cryogenic RPWELL: a novel charge-readout element for dual-phase argon TPCs

Novel resistive charge-multipliers for dual-phase LAr-TPCs: towards stable operation at higher gains

Discharge quenching mechanism and performance of RPWELL with tunable 3D printed resistive plates, charge evacuation in semiconductive glass RPWELL and discharge quenching for Cryogenic-RWELL over a wide range of resistivity

Laboratory studies of THGEM-based WELL structures with resistive anodes

First studies with the Resistive-Plate WELL gaseous multiplier

Beam Studies of the Segmented Resistive WELL: a Potential Thin Sampling Element for Digital Hadron Calorimetry

First results from cryogenic avalanche detectors based on gas electron multipliers

Toward Application of a Thick Gas Electron Multiplier (THGEM) Readout for a Dark Matter Detector

The μ-RWELL in High Energy Physics and beyond

Recent updates on the ArDM project: A Liquid Argon TPC for Dark Matter Detection

On the low-temperature performances of THGEM and THGEM/G-APD multipliers in gaseous and two-phase Xe

Operation of a Thick Gas Electron Multiplier (THGEM) in Ar, Xe and Ar-Xe

Long-term operation of a double phase LAr LEM Time Projection Chamber with a simplified anode and extraction-grid design

Operation of a double-phase pure argon Large Electron Multiplier Time Projection Chamber: comparison of single and double phase operation

First studies on cascaded dual-phase liquid hole-multipliers in xenon

Cryogenic THGEM–GPM for the Readout of Scintillation Light from Liquid Argon

Scintillation time dependence and pulse shape discrimination in liquid argon

Construction and operation of a Double Phase LAr Large Electron Multiplier Time Projection Chamber