The influence of discharge operation on the microstructure of strontium-doped lanthanum manganite cathode for solid oxide fuel cells

Jun Yang,Hiroki Muroyama,Toshiaki Matsui,Koichi Eguchi
DOI: https://doi.org/10.1016/j.jpowsour.2011.12.049
IF: 9.2
2012-04-01
Journal of Power Sources
Abstract:In this work, discharge operation at a large current density was conducted for strontium-doped lanthanum manganite (LSM) cathodes, and the change in performance and microstructure of the interface between LSM cathode and YSZ electrolyte was investigated. For (La0.8Sr0.2)0.97MnO3 (LSM97) with A-site deficiency, the performance was improved in the initial stage of discharge and then started to deteriorate continuously. The microstructural change in the interface between LSM97 and YSZ was quantitatively analyzed by using a dual-beam focused ion beam-scanning electron microscope. It was found that after discharge at 1.2Acm−2 for 60h, the surface of YSZ electrolyte was covered by a dense layer of LSM, accompanied with the formation of closed nanopores in the internal interface between LSM97 and YSZ. For (La0.8Sr0.2)1.03MnO3 (LSM103) with a slight A-site excess, neither apparent formation of dense LSM103 layer along the LSM103/YSZ interface nor performance deterioration was observed during discharge. The mechanism for the structural change of LSM97 cathode was discussed based on the obtained results.
energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
What problem does this paper attempt to address?