Abstract:Direct assembly is a newly developed technique in which a cobaltite- based perovskite (CBP) cathode can be directly applied to a barrier-layer-free Y2O3-ZrO2 (YSZ) electrolyte with no hightemperature pre-sintering steps. Solid oxide fuel cells (SOFCs) based on directly assembled CBPs such as La0.6Sr0.4Co0.2Fe0.8O3-delta show high performance initially but degrade rapidly under SOFC operation conditions at 750 degrees C owing to Sr segregation and accumulation at the electrode/electrolyte interface. Herein, the performance and interface of Sr-free CBPs such as LaCoO3-delta (LC) and Sm0.95CoO3-delta (SmC) and their composite cathodes directly assembled on YSZ electrolyte was studied systematically. The LC electrode underwent performance degradation, most likely owing to cation demixing and accumulation of La on the YSZ electrolyte under polarization at 500 mAcm(-2) and 750 degrees C. However, the performance and stability of LC electrodes could be substantially enhanced by the formation of LC-gadolinium-doped ceria (GDC) composite cathodes. Replacement of La by Sm increased the cell stability, and doping of 5% Pd to form Sm0.95Co0.95Pd0.05O3-delta d (SmCPd) significantly improved the electrode activity. An anode-supported YSZ-electrolyte cell with a directly assembled SmCPdGDC composite electrode exhibited a peak power density of 1.4 Wcm(-2) at 750 degrees C, and an excellent stability at 750 degrees C for over 240 h. The higher stability of SmC as compared to that of LC is most likely a result of the lower reactivity of SmC with YSZ. This study demonstrates the new opportunities in the design and development of intermediate-temperature SOFCs based on the directly assembled high-performance and durable Sr-free CBP cathodes.

Significant Promotion Effect of Bi2O3on the Activity and Stability of Directly Assembled Lanthanum Manganite Based Cathodes of Solid Oxide Fuel Cells

Highly active and stable Er0.4Bi1.6O3 decorated La0.76Sr0.19MnO3+δ nanostructured oxygen electrodes for reversible solid oxide cells

Active, Durable Bismuth Oxide-Manganite Composite Oxygen Electrodes: Interface Formation Induced by Cathodic Polarization

In Situ Formation of Er0.4Bi1.6O3 Protective Layer at Cobaltite Cathode/Y2O3-ZrO2 Electrolyte Interface under Solid Oxide Fuel Cell Operation Conditions

Nb and Pd co-doped La0.57Sr0.38Co0.19Fe0.665Nb0.095Pd0.05O3-δ as a stable, high performance electrode for barrier-layer-free Y2O3-ZrO2 electrolyte of solid oxide fuel cells

Effectively Promoting Activity and Stability of a MnCo2O4-Based Cathode by In Situ Constructed Heterointerfaces for Solid Oxide Fuel Cells

Enhancing ORR Catalytic Activity and Electrochemical Investigation of La1−2xBaxBixFeO3 Cathode for Low-Temperature Solid Oxide Fuel Cell

Cathode Surface Segregating Modification for Boosting Oxygen Reduction Reactions: Coupling Theory and Experiment in Proton Conducting Solid Oxide Fuel Cells (H-SOFCs)

Nanoscale architecture of (La0.6Sr1.4)0.95Mn0.9B0.1O4 (B Co, Ni, Cu) Ruddlesden–Popper oxides as efficient and durable catalysts for symmetrical solid oxide fuel cells

Effect of Pd doping on the activity and stability of directly assembled La0.95Co0.19Fe0.76Pd0.05O3-δ cathodes of solid oxide fuel cells

Highly Stable Sr-Free Cobaltite-Based Perovskite Cathodes Directly Assembled on A Barrier-Layer-Free Y2o3-Zro2 Electrolyte of Solid Oxide Fuel Cells

Flexible A-site doping La0.6-xMxSr0.4Co0.2Fe0.8O3 (M=Ca, Ba, Bi; x=0, 0.1, 0.2) as novel cathode material for intermediate-temperature solid oxide fuel cells: A first-principles study and experimental exploration

In Situ Assembled La0.8Sr0.2MnO3 Cathodes on a Y2O3–ZrO2 Electrolyte of Solid Oxide Fuel Cells – Interface and Electrochemical Activity

Electrochemical Performance and Stability of Sr-doped LaMnO 3 -Infiltrated Yttria Stabilized Zirconia Oxygen Electrode for Reversible Solid Oxide Fuel Cells

Improved electrochemical performance of Bi doped La0.8Sr0.2FeO3-δ nanofiber cathode for IT-SOFCs via electrospinning

A Strategy to Enhance the Catalytic Activity of Electrode Materials by Doping Bismuth for Symmetrical Solid Oxide Electrolysis Cells

Tuning Layer-Structured La0.6sr1.4mno4+Delta Into A Promising Electrode For Intermediate-Temperature Symmetrical Solid Oxide Fuel Cells Through Surface Modification

A-site bismuth doping, a new strategy to improve the electrocatalytic performances of lanthanum chromate anodes for solid oxide fuel cells

Colloidal Processing of Y0.08Zr0.92O2/La0.80Sr0.20MnO3 Semi-Cells Using a Sr-Doped Lanthanum Manganite Synthesized by a Citrate Route

Enhancing chemical stability and performance in proton-conducting solid oxide fuel cells through novel composite cathode design

Polarization-Induced Interface And Sr Segregation Of In Situ Assembled La0.6sr0.4co0.2fe0.8o3-Delta Electrodes On Y2o3-Zro2 Electrolyte Of Solid Oxide Fuel Cells