Abstract:Direct assembly is a newly developed technique in which a cobaltite- based perovskite (CBP) cathode can be directly applied to a barrier-layer-free Y2O3-ZrO2 (YSZ) electrolyte with no hightemperature pre-sintering steps. Solid oxide fuel cells (SOFCs) based on directly assembled CBPs such as La0.6Sr0.4Co0.2Fe0.8O3-delta show high performance initially but degrade rapidly under SOFC operation conditions at 750 degrees C owing to Sr segregation and accumulation at the electrode/electrolyte interface. Herein, the performance and interface of Sr-free CBPs such as LaCoO3-delta (LC) and Sm0.95CoO3-delta (SmC) and their composite cathodes directly assembled on YSZ electrolyte was studied systematically. The LC electrode underwent performance degradation, most likely owing to cation demixing and accumulation of La on the YSZ electrolyte under polarization at 500 mAcm(-2) and 750 degrees C. However, the performance and stability of LC electrodes could be substantially enhanced by the formation of LC-gadolinium-doped ceria (GDC) composite cathodes. Replacement of La by Sm increased the cell stability, and doping of 5% Pd to form Sm0.95Co0.95Pd0.05O3-delta d (SmCPd) significantly improved the electrode activity. An anode-supported YSZ-electrolyte cell with a directly assembled SmCPdGDC composite electrode exhibited a peak power density of 1.4 Wcm(-2) at 750 degrees C, and an excellent stability at 750 degrees C for over 240 h. The higher stability of SmC as compared to that of LC is most likely a result of the lower reactivity of SmC with YSZ. This study demonstrates the new opportunities in the design and development of intermediate-temperature SOFCs based on the directly assembled high-performance and durable Sr-free CBP cathodes.

Highly Stable Sr-Free Cobaltite-Based Perovskite Cathodes Directly Assembled on A Barrier-Layer-Free Y2o3-Zro2 Electrolyte of Solid Oxide Fuel Cells

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Polarization-Induced Interface And Sr Segregation Of In Situ Assembled La0.6sr0.4co0.2fe0.8o3-Delta Electrodes On Y2o3-Zro2 Electrolyte Of Solid Oxide Fuel Cells

Effect of Pd doping on the activity and stability of directly assembled La0.95Co0.19Fe0.76Pd0.05O3-δ cathodes of solid oxide fuel cells

Nb and Pd co-doped La0.57Sr0.38Co0.19Fe0.665Nb0.095Pd0.05O3-δ as a stable, high performance electrode for barrier-layer-free Y2O3-ZrO2 electrolyte of solid oxide fuel cells

In-situ self-assembly nano-fibrous perovskite cathode excluding Sr and Co with superior performance for intermediate-temperature solid oxide fuel cells

Self-assembled cathode induced by polarization for high-performance solid oxide fuel cell

Enhancing chemical stability and performance in proton-conducting solid oxide fuel cells through novel composite cathode design

Optimization of BaZr0.1Ce0.7Y0.2O 3-δ-based proton-conducting solid oxide fuel cells with a cobalt-free proton-blocking La0.7Sr0.3FeO 3-δ-Ce0.8Sm0.2O2-δ composite cathode

Facile preparation of electrodes of efficient electrolyte-supported solid oxide fuel cells using a direct assembly approach

Self‐Assembled Perovskite Nanocomposite With Beneficial Lattice Tensile Strain as High Active and Durable Cathode for Low Temperature Solid Oxide Fuel Cell

In Situ Formation of Er0.4Bi1.6O3 Protective Layer at Cobaltite Cathode/Y2O3-ZrO2 Electrolyte Interface under Solid Oxide Fuel Cell Operation Conditions

High performance and stability of nanocomposite oxygen electrode for solid oxide cells

High performance proton-conducting solid oxide fuel cells with a stable Sm0.5Sr0.5Co3-δ-Ce0.8Sm0.2O2-δ composite cathode

A new in situ strategy to eliminate partial internal short circuit in Ce0.8Sm0.2O1.9-based solid oxide fuel cells

Utilizing High Entropy Effects for Developing Chromium‐Tolerance Cobalt‐Free Cathode for Solid Oxide Fuel Cells

Sintered powder-base cathode over vacuum-deposited thin-film electrolyte of low-temperature solid oxide fuel cell: Performance and stability

A-Site Engineering of the High-Entropy Perovskite Pr0.4La0.4Ba0.4Sr0.4Ca0.4Fe2O5+δ Cathode for Intermediate-Temperature SOFCs

Improving stability and electrochemical performance of Ba0.5Sr0.5Co0.2Fe0.8O3-δ electrode for symmetrical solid oxide fuel cells by Mo doping

Electrochemical Performance and Stability of Nano-Structured Co/PdO-co-impregnated Y2O3 Stabilized ZrO2 Cathode for Intermediate Temperature Solid Oxide Fuel Cells

A high performance BaZr0.1Ce0.7Y0.2O3-δ-based solid oxide fuel cell with a cobalt-free Ba0.5Sr0.5FeO3-δ–Ce0.8Sm0.2O2-δ composite cathode