Abstract:Understanding the micro-mechanism of brittle creep in saturated rocks and studying their mechanical behaviors after creep damage are of great significance to the design of rock engineering and the prediction of the long-term evolution of the Earth's crust. In this study, we first performed a series of uniaxial creep tests with different creep stage cut-offs on saturated intact sandstones. The brittle creep mechanism of the specimens was explored microscopically by analyzing P-wave velocity, acoustic emission (AE), and nuclear magnetic resonance (NMR) measurements. Then, specimens with different degrees of creep damage were subjected to a secondary short-term loading test or creep test, and their short- and long-term mechanical behaviors, together with AE monitoring, were systematically investigated. The experimental results show that (1) the anisotropy of the specimens increases significantly during creep, with the axial and lateral P-wave velocities exhibiting a difference of 30% at the onset of tertiary creep. (2) The tensile cracks dominate the transient creep stage and the early part of the steady creep stage, while the shear cracks dominate thereafter. (3) The porosities of the specimens increase with the loading stages, and the porosity increments corresponding to small pores are greater than those corresponding to large pores, for all creep stages. (4) Specimens with different degrees of creep damage show greater deformability, and their short-term and creep mechanical parameters, except for uniaxial strength, change dramatically. (5) The AE characteristics of creep-damaged specimens differ significantly from those of intact specimens, and the Kaiser stress memory effect was observed during reloading, with the memory stress being the previous creep stress.

A new protocol to evaluate the behaviour and durability of marine structures

A non-linear multiscale chemo-mechanical model describing the delayed evolution of concrete structures in marine environments

Durability related environmental zonation and design methodology for marine RC structures

Durability of Structural Adhesive Exposed to Marine Environment

Prolonging the Durability of Maritime Constructions through a Sustainable and Salt-Resistant Cement Composite

THE IN-SITU MONITORING PRINCIPLES AND THE RESIDUAL LIFE PREDICTION OF THE DURABILITY OF CONCRETE STRUCTURE IN MARINE ENVIRONMENT

Degradation effect of seawater on the long-term dynamic behavior of artificially cemented sand

Investigating the Self-Healing Performance of Cracked Undersea Constructions

Physicochemical-mechanical simulation of the short- and long-term performance of FRP reinforced concrete beams under marine environments

The Influence of External Sulfate Attack on the Durability of Reinforced Mortars in the Presence of Calcined River Sediments

Data acquired on some old reinforced concrete structures to validate the threshold levels of the French performance‐based method for the durability of concrete structures

Experimental Study of the Creep Effect on the Mechanical Properties of Concrete

High ductility cementitious composites incorporating seawater and coral sand (SCS-HDCC) for offshore engineering: Microstructure, mechanical performance and sustainability

Durability of cementitious materials in seawater environment: A review on chemical interactions, hardened-state properties and environmental factors

Micro-mechanism of brittle creep in saturated sandstone and its mechanical behavior after creep damage

Hygrothermal deterioration in carbon/epoxy and glass/epoxy composite laminates aged in marine-based environment (degradation mechanism, mechanical and physicochemical properties)

Long-term performance of fiber reinforced cementitious composites with high ductility under seawater attack with different salinities

Surface Deterioration Analysis for Probabilistic Durability Design of RC Structures in Marine Environment

Deterioration Analysis of Seawater and Coral Sand Concrete in Simulated Marine Environment Based on CT Technique

Experimental Study on the Mechanical Properties of CFRP/epoxy Composite Plates under Seawater Immersion

Modeling compressive basic creep of concrete at early age