Abstract:Accurate corrosion assessment plays an important role in ensuring structural safety of reinforced concrete (RC) structures. However, on‐site assessment of existing concrete structures presents many challenges, including high costs, limited inspection timeframes, and difficult accessibility. To facilitate inspection‐based corrosion assessment, this paper presents a novel approach by combining short‐term acoustic emission (AE) monitoring with selective crack width measurements for corrosion level (CL) assessment. AE sensing is a monitoring technique which can detect ongoing internal degradation mechanisms by analyzing ultrasonic waves emitted by the damage process. Yet, two major challenges arise on site: (1) practical limitations prevent continuous AE monitoring over the structure's entire lifetime and (2) AE can only generate relative results in the absence of reference measurements. This paper addresses both challenges to bridge the gap between laboratory experiments and on‐site monitoring of corroding RC structures. First, short periods of AE monitoring data are analyzed to investigate the potential of AE sensing over limited timeframes. Second, AE data of corroding RC beams are combined with sparse crack width measurements in order to obtain absolute CLs. The proposed methodology is experimentally validated by corroding eight beams with varying dimensions, corrosion zones, and reinforcement layouts. The experimental results prove that the estimated CLs closely match the rebar mass losses, with a mean absolute error of 1.53% CL for beams reaching up to 14% CL, confirming the potential of the combined AE and crack width measurement technique as an efficient and accurate condition assessment approach. Moreover, AE sensing provides detailed spatial variability of the rebar corrosion in the monitored zone, which is challenging to obtain with conventional techniques. By using this dual‐technique approach, shorter monitoring periods prove nearly as effective as continuous AE monitoring in accurately estimating CLs.

Data acquired on some old reinforced concrete structures to validate the threshold levels of the French performance‐based method for the durability of concrete structures

Development of a calibration methodology to improve the on-site non-destructive evaluation of concrete durability indicators

THE STATE OF THE ART OF CONCRETE STRUCTURE DURABILITY MONITORING AND RESTORATION

THE IN-SITU MONITORING PRINCIPLES AND THE RESIDUAL LIFE PREDICTION OF THE DURABILITY OF CONCRETE STRUCTURE IN MARINE ENVIRONMENT

STUDY ON THE DURABILITY DESIGN METHOD OF CONCRETE STRUCTURE UNDER CARBONATION ON THE BASIS OF RELIABILITY

Effects of carbonation and chloride ingress on the durability of concrete structures

Method for evaluating durability of existing concrete bridges structures

Durability Performances of Carbon Fiber-Reinforced Polymer and Concrete-Bonded Systems under Moisture Conditions

Towards global indicator of durability performance and carbon footprint of clinker-slag-limestone cement-based concrete exposed to carbonation

Durability of Frp Concrete Bonds and Its Constituent Properties under the Influence of Moisture Conditions

Reliability design method for reinforced concrete structure based on durability

Economic assessment of corrosion prevention measures in new structures

Durability related environmental zonation and design methodology for marine RC structures

Deterioration Modelling of Gfrp-Reinforced Cement-Based Concrete Infrastructure in Service under the Natural Inland Atmospheric Environment

Optimization of field test method on durability of coastal concrete structure

Extent of corrosion damage for RC structures exposed to chloride-bearing environment

Bridging the Gap: Assessing Material Performance of Laboratory Specimens and Concrete Structures

Advances in research of technologies for durability enhancement of reinforced concrete structures

Durability parameters of three low-carbon concretes (low clinker, alkali-activated slag and supersulfated cement)

Corrosion level estimation in reinforced concrete beams by acoustic emission sensing and selective crack measurements

Updating deterioration models of reinforced concrete structures in carbonation environment using in-situ inspection data