Abstract:Abstract Recently, 3D porous graphene–polymer composite-based piezoresistive sensors have gained significant traction in the field of flexible electronics owing to their ultralightweight nature, high compressability, robustness, and excellent electromechanical properties. In this work, we present an improved facile recipe for developing repeatable, reliable, and linear 3D graphene–polydimethylsiloxane (PDMS) spongy sensors for internet of things (IoT)-enabled wearable systems and smart consumer products. Fundamental morphological characterization and sensing performance assessment of the piezoresistive 3D graphene–polymer sensor were conducted to establish its suitability for the development of squeezable, flexible, and skin-mountable human motion sensors. The density and porosity of the sponges were determined to be 250 mg cm −3 and 74% respectively. Mechanical compressive loading tests conducted on the sensors revealed an average elastic modulus as low as ∼56.7 kPa. Dynamic compressive force-resistance change response tests conducted on four identical sensors revealed a linear piezoresistive response (in the compressive load range 0.42–2.18 N) with an average force sensitivity of 0.3470 ± 0.0794 N −1 . In addition, an accelerated lifetime test comprising 1500 compressive loading cycles (at 3.90 N uniaxial compressive loading) was conducted to demonstrate the long-term reliability and stability of the sensor. To test the applicability of the sensors in smart wearables, four identical graphene–PDMS sponges were configured on the fingertip regions of a soft nitrile glove to develop a pressure sensing smart glove for real-time haptic pressure monitoring. Similarly, the sensors were also integrated into the Philips 9000 series electric shaver to realize smart shaving applications with the ability to monitor shaving motions. Furthermore, the readiness of our system for next-generation IoT-enabled applications was demonstrated by integrating the smart glove with an embedded system software utilizing the an open source microcontroller platform. The system was capable of identifying real-time qualitative pressure distribution across the fingertips while grasping daily life objects, thus establishing the suitability of such sensors for next-generation wearables for prosthetics, consumer devices, and personalized healthcare monitoring devices.

3D printed graphene/polyurethane wearable pressure sensor for motion fitness monitoring

Additive manufacturing of wearable flexible sensors based on GN/flexible resin composite materials

Highly Sensitive and Flexible Tactile Sensor Based on the Fabrication of Porous Graphene/Silicone Rubber Composites

Piezoresistive Pressure Sensor Based on a Conductive 3D Sponge Network for Motion Sensing and Human-Machine Interface.

3D fabric-based piezoresistive pressure sensor: design, preparation, performance and simulation

Flexible Pressure Sensor Constructed by Polyurethane Composite Conductive Sponge

Electrospinning Silk Fibroin/Graphene Nanofiber Membrane Used for 3D Wearable Pressure Sensor

Wearable piezoresistive pressure sensors based on 3D graphene

Three-Dimensional Printed Carbon Black/PDMS Composite Flexible Strain Sensor for Human Motion Monitoring

Piezoresistive 3D graphene–PDMS spongy pressure sensors for IoT enabled wearables and smart products

Highly Ordered 3D Porous Graphene Sponge for Wearable Piezoresistive Pressure Sensor Applications.

Biocompatible and breathable all-fiber-based piezoresistive sensor with high sensitivity for human physiological movements monitoring

Fragmented Graphene Aerogel/Polydimethylsiloxane Sponges for Wearable Piezoresistive Pressure Sensors

Low-cost, reliable and flexible piezoresistive pressure sensors coated with single layer graphene and silver nanowires on three-dimensional polyurethane sponge

A 3D honeycomb graphene structure for wearable piezoresistive pressure sensor with high sensitivity

3D-Printed Graphene Nanoplatelets/Polymer Foams for Low/Medium-Pressure Sensors

Structurally Designed Hydrogel-Based Pressure Sensors for Wearable Sensing

Advanced three-dimensional graphene-based piezoresistive sensors in wearable devices

Flexible Pressure Sensor with Micro-Structure Arrays Based on PDMS and PEDOT:PSS/PUD&CNTs Composite Film with 3D Printing

Preparation and Performance of Wearable Pressure Sensor Based on Three-Dimensional Flexible Fabric and Its Wireless Transmission System

Optimisation of properties of multidimensional hybrid polymer nanocomposites for flexible pressure sensors