Abstract:A biocompatible, flexible, yet robust conductive composite hydrogel (CCH) for wearable pressure/strain sensors has been achieved by an all-solution-based approach. The CCH is rationally constructed by in situ polymerization of aniline (An) monomers in the polyvinyl alcohol (PVA) matrix, followed by the cross-linking of PVA with glutaraldehyde (GA) as the cross-linker. The unique multiple synergetic networks in the CCH including strong chemical covalent bonds and abundance of weak physical cross-links, i.e., hydrogen bondings and electrostatic interactions, impart excellent mechanical strength (a fracture tensile strength of 1200 kPa), superior compressibility (ε = 80%@400 kPa), outstanding stretchability (a fracture strain of 670%), high sensitivity (0.62 kPa–1 at a pressure range of 0–1.0 kPa for pressure sensing and a gauge factor of 3.4 at a strain range of 0–300% for strain sensing, respectively), and prominent fatigue resistance (1500 cycling). As the flexible wearable sensor, the CCH is able to monitor different types of human motion and diagnostically distinguish speaking. As a proof of concept, a sensing device has been designed for the real-time detection of 2D distribution of weight or pressure, suggesting its promising potentials for electronic skin, human–machine interaction, and soft robot applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssensors.1c00699.Figures S1–S12: water content test of as-prepared hydrogels; swelling behavior of the CCH; FT-IR spectra of the PVA, PVA/PA, PVA/PA/PANI, and PVA/PA/GA/PANI; stress–strain curves of CCHs with different contents of An; dynamic mechanical analysis of the hydrogels; toughness and elastic modulus of CCHs; processability of hydrogels; cyclic loading–unloading curves of the CCH; experimental setup for sensing performance evaluation; sensitivity of the sensors with different contents of An; relative resistance change–pressure curves of three CCH samples; cells observed by the inverted microscope; Tables S1 and S2: comparison of mechanical performance and electrical conductivity with recent results reported in the literature; a comparison of the sensing performance with recent results reported in the literature (PDF)Compression testing of the CCH (MP4)Stretching process of the CCH (MP4)Resistance change in the reversible compressing shown via an LED indicator (MP4)Resistance change of the reversible stretching shown via an LED indicator (MP4)Visualization of the resistance change on the same position of the checkboard device (MP4)Visualization of the resistance change on the different position of the checkboard device (MP4)This article has not yet been cited by other publications.

Structurally Designed Hydrogel-Based Pressure Sensors for Wearable Sensing

3-D Printable Flexible Hydrogel-Based Sensors With Gradient Porous Structure

3D printed microstructured ultra-sensitive pressure sensors based on microgel-reinforced double network hydrogels for biomechanical applications

3D printing hydrogel with structural design via vat photopolymerization for strain sensing

Wearable Pressure Sensor Using Porous Natural Polymer Hydrogel Elastomers with High Sensitivity over a Wide Sensing Range.

Enhancing the Performance of Hydrogel Strain/pressure Sensors Via Gradient-Entanglement-induced Surface Wrinkling Patterns

Bioinspired 3D Printable, Self-Healable, and Stretchable Hydrogels with Multiple Conductivities for Skin-like Wearable Strain Sensors

Wearable Sensors: Micropatterned Elastic Gold‐Nanowire/Polyacrylamide Composite Hydrogels for Wearable Pressure Sensors (adv. Mater. Technol. 7/2018)

Highly Sensitive Flexible Pressure Sensor Based on Microstructured PDMS for Wearable Electronics Application

3D Printed Skin‐Inspired Flexible Pressure Sensor with Gradient Porous Structure for Tunable High Sensitivity and Wide Linearity Range

A bioinspired porous-designed hydrogel@polyurethane sponge piezoresistive sensor for human-machine interfacing

Incorporating Wireless Strategies to Wearable Devices Enabled by a Photocurable Hydrogel for Monitoring Pressure Information (Adv. Mater. 29/2023)

HCNT/AgNPs/PVA/PAM hydrogel-based flexible pressure sensor for physiological monitoring

Tunable Wide Range and High Sensitivity Flexible Pressure Sensors with Ordered Multilevel Microstructures

Flexible Pressure Sensor with Micro-Structure Arrays Based on PDMS and PEDOT:PSS/PUD&CNTs Composite Film with 3D Printing

Ultrastretchable, Ultralow Hysteresis, High-Toughness Hydrogel Strain Sensor for Pressure Recognition with Deep Learning

High Sensitivity Flexible Capacitive Pressure Sensor Using Polydimethylsiloxane Elastomer Dielectric Layer Micro-Structured by 3-D Printed Mold

Anti-freezing, Resilient and Tough Hydrogels for Sensitive and Large-Range Strain and Pressure Sensors

Adjusting Sensitivity and Linearity of the Wearable Pressure Sensors by an Arbitrary Micro‐Protuberance Structure of Polyvinylidene Fluoride/Reduced Graphene Oxide Dielectric Films

Multi-Scale Design of Micro-Pattern and Hierarchical Fiber Network Structure for Wearable Piezoresistive Pressure Sensor

Solution-Processable Conductive Composite Hydrogels with Multiple Synergetic Networks toward Wearable Pressure/Strain Sensors