Abstract:We report a flexible strain sensor fabrication method, which utilizes polydimethylsiloxane (PDMS)/conductive carbon paste composite as the ink and deposits the ink in PDMS without a support layer using embedded 3D printing technology to fabricate the sensor. The approach reduces the sensor fabrication cost and broadens the fabrication method by simplifying the composite ink and flexible substrate fabrication process. Flexible strain sensors are widely used in the fields of human motion monitoring, electronic skin, and soft robotics. In this work, to satisfy the demand for high‐sensitivity, low‐cost, and fast‐response flexible strain sensors for these fields, embedded 3D printing (E‐3DP) technology is employed to fabricate highly sensitive and fast‐responding flexible strain sensors. The effects of conductive carbon paste concentration and printing process parameters by establishing the E‐3DP system on the piezoresistive behavior of the sensor were investigated. The results show that the gauge factor of the strain sensor is about 36.1 and 247.67, under the strain of 0%–40% and 40%–45%, respectively. Its response/recovery time is about 250/350 ms. On this basis, the sensor can also accurately sense and distinguish the motion in distinct parts of the human body, demonstrating that the flexible strain sensor manufactured by the method possesses the potential to be widely used in the fields of human motion monitoring, electronic skin, and soft robotics.

Three-Dimensional Printed Carbon Black/PDMS Composite Flexible Strain Sensor for Human Motion Monitoring

A Flexible and Multipurpose Piezoresistive Strain Sensor Based on Carbonized Phenol Formaldehyde Foam for Human Motion Monitoring

Practical And Durable Flexible Strain Sensors Based On Conductive Carbon Black And Silicone Blends For Large Scale Motion Monitoring Applications

A Flexible Strain Sensor Based on the Porous Structure of a Carbon Black/Carbon Nanotube Conducting Network for Human Motion Detection

A Flexible Strain Sensor of Porous Conductive Silicone Rubber Composites Prepared from High Internal Phase Emulsion

3D Printed Reduced Graphene Oxide/Elastomer Resin Composite with Structural Modulated Sensitivity for Flexible Strain Sensor

A stretchable flexible strain sensor with high sensitivity and fast response fabricated by embedded 3D printing of the hybrid polydimethylsiloxane/conductive carbon paste composites

Flexible Strain Sensor Based on Carbon Black/Silver Nanoparticles Composite for Human Motion Detection

Flexible Strain Sensor Based on Carbon Black/Silver Nanoparticles Composite for Human Motion Detection.

High-Performance Multidirectional Flexible Strain Sensor for Human Motion and Health Monitoring

Stretchable and Sensitive Strain Sensors Based on CB/MWCNTs–TPU for Human Motion Capture and Health Monitoring

Flexible and Wearable Strain Sensor Based on Electrospun Carbon Sponge/polydimethylsiloxane Composite for Human Motion Detection

Development of a Carbon‐Based Flexible Strain Sensor for Diverse Human Motion Monitoring

A Low-Cost, Printable, and Stretchable Strain Sensor Based on Highly Conductive Elastic Composites with Tunable Sensitivity for Human Motion Monitoring

High-performance strain sensors based on bilayer carbon black/PDMS hybrids

Cost-Effective Fabrication of Transparent Strain Sensors via Micro-Scale 3D Printing and Imprinting

Fabrication of high sensitivity and stable strain sensors based on composite folded structures via embedded 3D printing

Design Strategy for Hierarchical Structure of Carbon Black on Microporous Elastomer Surface Toward Stretchable and Compressive Strain Sensors

Facile and Economical Fabrication of Superhydrophobic Flexible Resistive Strain Sensors for Human Motion Detection

Highly Sensitive and Large-Range Strain Sensor with a Self-compensated Two-order Structure for Human Motion Detection.

Flexible Strain Sensors Based on Bionic Parallel Vein-like Structures for Human Motion Monitoring