Abstract:Flexible wearable devices have attracted wide attention in capacious fields because of their real-time and continuous monitoring of human information. The development of flexible sensors and corresponding integration with wearable devices is of great significance to build smart wearable devices. In this work, multi-walled carbon nanotube/polydimethylsiloxane-based (MWCNT/PDMS) resistive strain sensors and pressure sensors were developed to integrate a smart glove for human motion/perception detection. Firstly, MWCNT/PDMS conductive layers with excellent electrical and mechanical properties (resistivity of 2.897 KΩ · cm, elongation at break of 145%) were fabricated via a facile scraping-coating method. Then, a resistive strain sensor with a stable homogeneous structure was developed due to the similar physicochemical properties of the PDMS encapsulation layer and MWCNT/PDMS sensing layer. The resistance changes of the prepared strain sensor exhibited a great linear relationship with the strain. Moreover, it could output obvious repeatable dynamic response signals. It still had good cyclic stability and durability after 180° bending/restoring cycles and 40% stretching/releasing cycles. Secondly, MWCNT/PDMS layers with bioinspired spinous microstructures were formed by a simple sandpaper retransfer process and then assembled face-to-face into a resistive pressure sensor. The pressure sensor presented a linear relationship of relative resistance change and pressure in the range of 0–31.83 KPa with a sensitivity of 0.026 KPa−1, and a sensitivity of 2.769 × 10−4 KPa−1 over 32 KPa. Furthermore, it responded quickly and kept good cycle stability at 25.78 KPa dynamic loop over 2000 s. Finally, as parts of a wearable device, resistive strain sensors and a pressure sensor were then integrated into different areas of the glove. The cost-effective, multi-functional smart glove can recognize finger bending, gestures, and external mechanical stimuli, which holds great potential in the fields of medical healthcare, human-computer cooperation, and so on.

A flexible strain sensor based on CNTs/PDMS microspheres for human motion detection

Stretchable and Sensitive Strain Sensors Based on CB/MWCNTs–TPU for Human Motion Capture and Health Monitoring

A Flexible Strain Sensor Based on the Porous Structure of a Carbon Black/Carbon Nanotube Conducting Network for Human Motion Detection

Extremely stretchable strain sensors with ultra-high sensitivity based on carbon nanotubes and graphene for human motion detection

Strain and Pressure Sensors Based on MWCNT/PDMS for Human Motion/Perception Detection

Biomimetic Strain Sensors Based on Patterned Polydimethylsiloxane and Ir Nanoparticles Decorated Multi-Walled Carbon Nanotubes

A Highly Sensitive Strain Sensor with Self-Assembled MXene/Multi-Walled Carbon Nanotube Sliding Networks for Gesture Recognition

Strain Sensor with High Sensitivity and Large Response Range Based on Self-Assembled Elastic-Sliding Conductive Networks

Flexible Strain-Sensitive Silicone-CNT Sensor for Human Motion Detection

A stretchable petal patterned strain sensor comprising Ir nanoparticles-modified multi-walled carbon nanotubes for human-motion detection

Flexible Strain Sensor Enabled by Carbon Nanotubes‐Decorated Electrospun TPU Membrane for Human Motion Monitoring

A stretchable and transparent strain sensor based on sandwich-like PDMS/CNTs/PDMS composite containing an ultrathin conductive CNT layer

Thin and high conductive multi‐walled carbon nanotubes/polydimethylsiloxane composite film prepared via solvent method as strain sensors

Highly sensitive and flexible strain sensor based on AuNPs/CNTs’ synergic conductive network

A flexible piezoresistive strain sensor based on MXene/bacterial cellulose hydrogel with high mechanical strength for real-time monitoring of human motions

Super-stretchable, Transparent Carbon Nanotube-Based Capacitive Strain Sensors for Human Motion Detection

Flexible Strain Sensor Based on Nickel Microparticles/Carbon Black Microspheres/Polydimethylsiloxane Conductive Composites for Human Motion Detection

Highly sensitive flexible strain sensors with novel tubular fiber design for human motion monitoring

Three-Dimensional Printed Carbon Black/PDMS Composite Flexible Strain Sensor for Human Motion Monitoring

Highly Sensitive and Stretchable MXene/CNTs/TPU Composite Strain Sensor with Bilayer Conductive Structure for Human Motion Detection.

Reinforced standing multi-walled carbon nanotube film for stretchable strain sensor