Abstract:Quasi-solid state electrolyte is one of the promising options for next generation batteries due to its superiority on safety and electrochemistry performance. However, the trade-off between the electrolyte swelling ratio and mechanical property of the quasi-solid state electrolyte significantly influences the battery performance. Herein, we design a nonswelling, solvent-adaptive polymer gel composed of oleophobic zwitterion poly(3-(1-vinyl-3-imidazolio)-propanesulfonate) and oleophilic elastomer poly(2-methoxyethyl acrylate) segments to retain high battery performance without sacrificing the mechanical property in lithium batteries. The as-designed gel can not only uptake enough electrolyte for a high ionic conductivity of 1.78 mS cm–1 but also achieve excellent mechanical strength with compression stress at 90% strain (σ0.9) reaching 5.8 MPa after long time soaking for battery safety due to its nonswelling property in ester electrolyte. Moreover, the as-prepared zwitterionic gel is beneficial to electrolyte salt dissociation, which further enhances the ionic conductivity and transference number of batteries. Consequently, the gel electrolyte can cycle for more than 500 h under a high current density of 3 mA cm–2 on dendrite inhibition performance, and when assembled with LiFePO4 as a cathode, the battery demonstrates a reversible specific capacity as high as 70 mAh g–1 under a high current density of 5 C after 300 cycles. The rational designed solvophilic/solvophobic zwitterionic elastomers provide a guidance for engineering quasi-solid state electrolytes of different solvents with broad applications on flexible devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01064?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01064</a>.Molecular structures of PVMGE, VIPS, MEA, PEGDA and HHMP; Raman spectra characterizing the dissociation effect of PVIPS on LiTFSI; images of PV4M3GE before and after the compression; exhibition of the brittleness of PVIPS gel electrolyte; frequency dependencies and tensile test of PV1M1GE; ionic conductivity of the PVMGEs; temperature dependence of ionic conductivity of PV1M1GE; Li stripping/plating voltage profiles and cycling stability of lithium symmetric cells with liquid electrolyte; cycling stability of PMEA electrolyte for lithium symmetric battery; SEM images of lithium anode of lithium symmetric battery with liquid electrolyte and PMEA; LSV curve of lithium symmetric cells; rate performances and cycling performances of liquid electrolyte; CV profiles and cycle stability of LiFePO4/PV1M1GE/Li; and comparison of electrochemical performance for PV1M1GE with other electrolytes (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01064/suppl_file/am1c01064_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Physical ionogels with only 2 wt % gelators as efficient quasi-solid-state electrolytes for lithium batteries

Solvate ionic liquid-based ionogels for lithium metal batteries over a wide temperature range

Ionogel Electrolytes for High-Performance Lithium Batteries: A Review

Electrochemical Characteristics of Elastic, Non-Polar Polyurethane-Based Polymer Gel Electrolyte for Separator-Less Lithium-Ion Batteries

Ionogel hybrid polymer electrolytes encompassing room-temperature ionic liquids for 4V-class Li-metal batteries operating at ambient temperature

Highly Conductive, Flexible, and Nonflammable Double-Network Poly(ionic Liquid)-Based Ionogel Electrolyte for Flexible Lithium-Ion Batteries.

High-Performance and Highly Safe Solvate Ionic Liquid-Based Gel Polymer Electrolyte by Rapid UV-Curing for Lithium-Ion Batteries

Silica-based Ionogel Electrolyte with Porous Flower-Like Structure Enables Safer Lithium Ion Battery

Core-Shell Structured Gel Polymer Electrolyte with Single-Ion Conducting and Thermal Stability Bifunction for Lithium-Ion Batteries

Decoupling of Mechanical Strength and Ionic Conductivity in Zwitterionic Elastomer Gel Electrolyte toward Safe Batteries

Novel Chemical Cross-Linked Ionogel Based on Acrylate Terminated Hyperbranched Polymer with Superior Ionic Conductivity for High Performance Lithium-Ion Batteries

Inorganic Fillers Tailored Li+ Solvation Sheath for Stable Lithium Metal Batteries

Dilutedly localized high-concentration ionogel electrolyte enabling high-voltage quasi-solid-state lithium metal batteries

High-performance Polymeric Ionic Liquid–silica Hybrid Ionogel Electrolytes for Lithium Metal Batteries

One-step preparation of epoxy resin-based ionic gel electrolyte for quasi-solid-state lithium metal batteries

Highly Tough, Li‐Metal Compatible Organic–Inorganic Double‐Network Solvate Ionogel

In Situ Polymerized Zwitterionic Copolymer Ionic Gel Electrolytes with High Performance for Lithium-Ion Batteries

Porous Composite Gel Polymer Electrolyte with Interfacial Transport Pathways for Flexible Quasi Solid Lithium-Ion Batteries.

Quasi-solid-state electrolyte for ultra-high safety and cycle stability battery

High-performance gel electrolyte for enhanced interface compatibility and lithium metal stability in high-voltage lithium battery

Rationally Designed in-Situ Gelled Polymer-Ceramic Hybrid Electrolyte Enables Superior Performance and Stability in Quasi-Solid-State Lithium-Sulfur Batteries