Abstract:Carbon capture and storage is crucial to decarbonising the power sector, as no other technology can significantly reduce emissions from fossil fuel power generation systems. Yet, the mature CO2 capture technologies result in net efficiency penalties of at least 7% points. Emerging technologies, such as calcium looping combustion, can reduce the net efficiency penalty to 2.4% points. Further reductions can be achieved by replacing the conventional steam cycle with advanced power cycles. This study aimed to assess the techno-economic feasibility of the coal-fired power plant based on calcium looping combustion with different advanced Brayton cycles. These included single power cycles, such as recompression supercritical CO2, simple supercritical CO2 cycle, and xenon cycle, as well as combined power cycles based on helium, nitrogen and recompression supercritical CO2 cycles. The net efficiency and break-even electricity price, which was estimated using the net present value method, were used as the key techno-economic performance indicators. A parametric study was also conducted to assess the impact of the key thermodynamic parameters. This study showed that the case based on a single recompression supercritical CO2 cycle had the best overall techno-economic performance, while the recompression supercritical CO2 combined cycle case had the best techno-economic performance among combined cycle cases. The former was characterised with a net efficiency of 38.9%, which is higher than that of the reference coal-fired power plant without CO2 capture (38.0%). Such performance was achieved at a break-even electricity price of 71.2 €/MWel,neth, corresponding to a cost of CO2 avoided of 16.3 €/tCO2.

A novel coal-based Allam cycle coupled to CO 2 gasification with improved thermodynamic and economic performance

Performance Analysis of a Modified Allam Cycle Combined with an Improved LNG Cold Energy Utilization Method

Performance Analysis and Evaluation of a Supercritical CO2 Rankine Cycle Coupled with an Absorption Refrigeration Cycle

Thermodynamic analysis of a novel zero carbon emission coal-based polygeneration system incorporating methanol synthesis and Allam power cycle

New insight into Allam cycle combined with coal gasification in supercritical water

Thermodynamic Analysis of Coal-Fired Thermal Power Units Coupled S-CO2 Energy Storage System

Energy Transfer and Conversion in the Allam Cycle with a Multi-Stream Heat Exchanger

Proposal and comparison of two heat recovery measures for the coal-based Allam cycle: Double expansion and lower turbine backpressure

Thermodynamic analysis of a novel biomass polygeneration system for ammonia synthesis and power generation using Allam power cycle

Thermodynamic and Economic Analysis of Oxy-Fuel-Integrated Coal Partial Gasification Combined Cycle

Simulation of the Allam cycle with carbon dioxide working fluid and comparison with Brayton cycle

Optimization study on improving energy efficiency of power cycle system of staged coal gasification coupled with supercritical carbon dioxide

Thermodynamic analysis of using chemical-looping combustion in Allam-Z cycle instead of common combustion

Evaluating the feasibility of a novel Allam cycle for co-generating power and water in hot regions

A novel peak shaving approach to improving load flexibility of the Allam cycle by integrating cold energy storage

Techno-economic assessment of the modified Allam cycle configurations with multi-stage pump/compressor for efficient operation in hot regions

Thermodynamic, Economic and Environmental Evaluation of an Improved Ventilation Air Methane-Based Hot Air Power Cycle Integrated with a De-Carbonization Oxy-Coal Combustion Power Plant

Techno-economic evaluation for coal-based polygeneration systems of heat, power, oil and synthetic natural gas

Thermodynamic analysis and optimization of a dual-pressure Allam cycle integrated with the regasification of liquefied natural gas

Advanced power cycles for coal-fired power plants based on calcium looping combustion: A techno-economic feasibility assessment

Optimal design and thermodynamic evaluation of supercritical CO 2 oxy-coal circulating fluidized bed power generation systems