Abstract:To improve the microstructure of low-temperature-processed CsPbIBr2 films, a chlorobenzene (CB) and isopropyl alcohol (IPA) mixed solution is used as an antisolvent to fabricate CsPbIBr2 films. It is found that the modified film by the mixed antisolvent demonstrates a better morphology, crystallinity, absorption of sunlight, less trap-state density (Ntrap), and suppressed carrier recombination. The modified perovskite solar cells (PSCs) without a hole-transport layer (HTL) achieve a champion efficiency of 7.05%, being much higher by 28.18% than that of the Reference-PSCs without an antisolvent. Moreover, the HTL of undoped zinc phthalocyanine (ZnPc) prepared by solution processing is used to promote charge transfer and protect the CsPbIBr2 film from damage caused by humid air at the CsPbIBr2/carbon interface. The best PSC with a structure of FTO/TiO2/CsPbIBr2/ZnPc/carbon yields a champion efficiency of 8.48% (Reference-PSC, 5.50%) with an open-circuit voltage of 1.23 V. The modified PSCs without encapsulation demonstrate improved humidity stability and retain about 90% (Reference-PSC, ∼70%) of their initial efficiency after storage at a 20% relative humidity in air for 30 days. In addition, the modified PSCs possess good light and thermal stability. Our work provides a feasible low-temperature (150 °C) process to prepare CsPbIBr2 films with the preferred orientation and stable, efficient all-inorganic PSCs (200 °C).The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c03554.Photovoltaic parameters, PCE, and J–V curves of the devices treated with the CI antisolvent with different IPA:CB volume ratios; photovoltaic parameters, PCE, and J–V curves of CI-ZnPc-PSCs with different ZnPc concentrations; summary of low-temperature-processed carbon-based all-inorganic CsPbIBr2 PSCs reported in recent years; photographs of color evolution of the Reference-, CI-, IPA-, and CB-films treated at 30 °C for 600 s; thickness of the Reference-film and the CI-film measured by an ellipsometer (PDF)This article has not yet been cited by other publications.

Low‐Temperature Processed CsPbI3 for Flexible Perovskite Solar Cells Through Cs─I bond Weakening

Low-temperature Preparation Achieving 10.95%-Efficiency of Hole-Free and Carbon-Based All-Inorganic CsPbI3 Perovskite Solar Cells

Stable Hole-Free, Carbon-Based CsPbI3 Perovskite Solar Cells Achieving 12.45 %-Efficiency at a Low Temperature with Mn Doping and Excess CsBr Simultaneously

Efficient Stabilization and Passivation for Low-Temperature-Processed γ-CsPbI 3 Solar Cells

Low‐Temperature Crystallization of CsPbIBr 2 Perovskite for High Performance Solar Cells

Interface Engineering of Low Temperature Processed All-Inorganic CsPbI2Br Perovskite Solar Cells Toward PCE Exceeding 14%

Ambient Air Temperature Assisted Crystallization for Inorganic CsPbI2Br Perovskite Solar Cells

Temperature-Reliable Low-Dimensional Perovskites Passivated Black-Phase CsPbI3 toward Stable and Efficient Photovoltaics

CaF2 Nanoparticle-Induced Γ-Cspbi2.81br0.19 Heterogeneous Crystallization for High-Efficiency Flexible All-Inorganic Perovskite Solar Cells.

Crystallization Management of CsPbI2Br Perovskites by PbAc2-incorporated Twice Spin-Coating Process for Efficient and Stable CsPbI2Br Perovskite Solar Cells

A Mixed Antisolvent-Assisted Crystallization Strategy for Efficient All-Inorganic CsPbIBr 2 Perovskite Solar Cells by a Low-Temperature Process

Morphology Controlling of All‐Inorganic Perovskite at Low Temperature for Efficient Rigid and Flexible Solar Cells

Bifunctional Passivation for Efficient and Stable Low-Temperature Processed All-Inorganic CsPbIBr2 Perovskite Solar Cells

Facile Hydrogen‐Bonding Assisted Crystallization Modulation for Large‐area High‐quality CsPbI2Br Films and Efficient Solar Cells

Low‐Temperature Stable CsPbI2Br Perovskite for Solar Photovoltaics and Blue Photodetection

Efficient Stabilization and Passivation for Low-Temperature-Processed Γ-Cspbi3 Solar Cells

CaF 2 Nanoparticle-Induced γ-CsPbI 2.81 Br 0.19 Heterogeneous Crystallization for High-Efficiency Flexible All-Inorganic Perovskite Solar Cells

Phase transition induced recrystallization and low surface potential barrier leading to 10.91%-efficient CsPbBr3 perovskite solar cells

Mitigating interfacial and bulk defects via chlorine modulation for HTL-free all-inorganic CsPbI2Br carbon-based perovskite solar cells with efficiency over 14%

Antisolvent‐Free Heterogenous Nucleation Enabled by Employing 4‐Tert‐Butyl Pyridine Additive and Two‐Step Annealing for Efficient CsPbI2Br Perovskite Solar Cells

A Stabilized Γ-Cspbi3 by Poly(allylamine Hydrochloride) for Wide-Band Gap Perovskites Solar Cells with Enhanced Performance